Face Down Finisher - Riso 9630R User Manual

8
Optional
Equipment

Face Down Finisher

If the optional face down finisher is connected, you can staple printed sheets, or perform offset output for each
set of printed documents.
A Stacking Tray
Printouts are output face down.
B Stacking Tray Setting Position
Slide into position depending on the paper type or output
condition.
C Jam Release Cover
D Staple Cartridge
Pull out the staple cartridge to replace staples, or if a
staple is jammed.
E Staple Cover
Open this cover if a staple is jammed, or to replace the
staple cartridge.
F Face Down Finisher Socket
Connect the face down finisher power cord.
• The stacking tray slides. For normal output,

align the
8-2
Optional Equipment

and shown in B.
Normal (except for the
case shown on the right)
Align  and .
ComColor GD Series User's Guide
When using B5 or
smaller paper without
staples
Position  and  apart
from each other.