Print Position - Riso 9630R User Manual

Chapter 3 Printing
■ Apply Page
[All Pages], [First Page]
■ Text Decoration
[Font]
Select a font and style.
[Size]
Specify the character string size.
[Color]
Specify the color of the character string. Click [Others] to
select a color from the color palette of the operating
system.
[Transparency]
Specify the transparency of the character string. A higher
transparency means that the print data will be more
visible in the background of the watermark character
string.
[Frame]
[Not Installed], [Circle], [Rectangle], [Double
Rectangle]
Select a frame for the watermark.

■ Print Position

[Text Angle]
[Horizontal (0 deg)], [Vertical (90 deg)], [Vertical
(270 deg)], [Oblique (45 deg)], [Oblique (315 deg)],
[Custom] (0-360 deg)
Select the angle of the text. You can also enter the
numerical angle of the text.
[Print Position]
[Center], [Top Left], [Top Center], [Top Right],
[Center Right], [Bottom Right], [Bottom Center],
[Bottom Left], [Center Left], [Custom]
Select the print position of the watermark. You can also
enter the values for the positions in the vertical and
horizontal directions.
3-18
Stamp
Stamp the page number, date, or text in the header
or footer.
Select the [Stamp] check box and click [Details] to
display the [Stamp] dialog box. Use the tab screens to
configure the settings.
[Page], [Date], [Text]
• You cannot print different types of stamps in the
same position.
• When using this function with [Combine] or
[Image Repeat], the page number and date are
stamped on each page of the copy paper, not
per page of the original document. When using
this function with [Booklet], the page number
and date are stamped on each booklet page.
■ Page
To print the page stamp, select [ON] on the [Page] tab
screen.
[Top Left], [Top Center], [Top Right], [Bottom Left],
[Bottom Center], [Bottom Right]
Select the page stamping position.
[Transparency]
Select the [Transparency] check box to have the date
stamped on top when the stamp area and images
overlap.
Remove the check mark to create a white space by
removing images in the stamp area, and then stamp the
date in that white space.
[Start Number]
Enter the first number for the page stamp.
[Stamp Start Page]
Enter which page to start the page stamps. To print no
page stamp on the cover, set [Stamp Start Page] to "2"
(For duplex printing, set this to "3" depending on the
case).
[Font]
Select a font and style.
[Size]
Specify the size of the text for the page stamp.
ComColor GD Series User's Guide