Riso 9630R User Manual page 74

Chapter 1 Copying
6
Configure the [View Favorites]
setting.
• When you select [Common], the common favorites
and the favorites registered as factory settings are
displayed.
• When you select [Personal], the personal favorites
are displayed.
• When you select both [Common] and [Personal],
the common favorites, the favorites registered as
factory settings, and the personal favorites are
displayed.
• [View Favorites] may not be displayed
depending on the configuration by the
administrator. In this case, the common
favorites and the favorites registered as
factory settings are displayed.
7
Touch [OK].
8
Touch [Close].
Saving as Default
You can register the values and the number of
copies set using the setting buttons as default
settings.
Perform the operation while the details you wish to
register are configured.
1
Touch [Custom Menu].
The [Custom Menu] screen is displayed.
2
Touch [Default Setting].
3
Touch [Entry].
The [Save as Default] screen is displayed. Check
the current settings.
1-34
4
Touch [OK].
The settings are registered as default settings.
5
Touch [Close].
• The following setting cannot be registered as
default settings:
- [Paper Selection]
Clearing Defaults
Clear a default value registered by an individual
and return the value to the common default value.
1
Touch [Custom Menu].
The [Custom Menu] screen is displayed.
2
Touch [Default Setting].
3
Touch [Clear].
The [Initialize] screen is displayed.
4
Touch [OK].
The default values are cleared.
5
Touch [Close].
• The administrator privilege is required in order
to clear a common default value. Contact your
administrator for details.
ComColor GD Series User's Guide