Riso 9630R User Manual page 111

■ Binding Margin Settings
Select the binding edge and click [Details] to display the
[Binding Edge] dialog box.
Specify the margin width.
Select the [Auto Reduction] check box to automatically
reduce the printed image to fit the paper in cases where
the margin width does not allow for the original-scale
printed image to fit into the paper.
Without a margin
Paper
Binding
margin
Print surface
Print surface is
automatically
reduced.
Binding margin
Staple
If you are using the optional face down finisher or
multifunction finisher, the staple function is
available at the specified position.
For more information, see the following:
• When using the face down finisher (p. 8-4
"Staple")
• When using the multifunction finisher (p. 8-28
"Staple")
With a margin
Punch
When using the optional multifunction finisher, you
can configure holes to punch.
For more information, see "Punch" (p. 8-30) in
"Optional Equipment".
Fold
When using the optional multifunction finisher, you
can configure how the paper is folded.
For more information, see "Fold" (p. 8-30) in
"Optional Equipment".
Booklet Binding
When using the optional multifunction finisher, you
can configure the binding method.
For more information, see "Booklet Binding"
(p. 8-32) in "Optional Equipment".
Offset Output
If you are using the optional face down finisher,
high capacity stacker, or multifunction finisher, you
can configure how the output position is offset.
For more information, see the following:
• When using the face down finisher (p. 8-6 "Offset
Output")
• When using the high capacity stacker (p. 8-23
"Offset Output")
• When using the multifunction finisher (p. 8-34
"Offset Output")
ComColor GD Series User's Guide
Printer Driver Settings
3-21
3