Finishing] Tab - Riso 9630R User Manual

[Finishing] Tab

For more information on each setting item, see
"[Finishing] Tab" (p. 3-20) in "Printing".
• For more information on the following function
when using the face down finisher, see "Face
Down Finisher" (p. 8-2):
[Staple], [Offset Output]
• For more information on the following function
when using the stacking tray, see "Stacking
Tray (Auto-control Stacking Tray / Wide
Stacking Tray)" (p. 8-13):
[Output Tray], [Output Tray Relay]
• For more information on the following function
when using the high capacity stacker, see "High
Capacity Stacker" (p. 8-18):
[Offset Output], [Output Tray], [Output Tray
Relay]
• For more information on the following function
when using the multifunction finisher, see
"Multifunction Finisher" (p. 8-26):
[Staple], [Punch], [Fold], [Offset Output], [Output
Tray], [Output Tray Relay]
• [Make Mail] is not available with the PostScript
printer driver when using the Wrapping
Envelope Finisher.
• [Perfect Binding] is not available with the
PostScript printer driver when using the Perfect
Binder.
Booklet Binding
Perform duplex printing of a series of multiple
pages and create a booklet by bi-folding the paper.
The booklet can also be bound in the center with a
staple. For more information on booklet binding,
see "Booklet Binding" (p. 8-32) in "Optional
Equipment".
Select the booklet binding method and click [Details] to
display the [Booklet Binding] dialog box.
• [Booklet Binding] cannot be used with [Specify
Tray per Page], [Form Overlay], and [Reverse
Order] at the same time. (p. 8-45 "Tray
Selection Per Page", p. 8-49 "Form Overlay",
p. 8-52 "Reverse Order")
■ Separating Books
Printouts are output upon being separated per booklet
based on a certain number of pages per volume. The
imposition will differ depending on the settings.
[OFF]
The pages will be imposed so that the pages are in order
when the booklet is bound in the center. When the data
contains a large number of pages, the booklets will be
output as multiple volumes. The pages will be imposed
so that when these volumes are opened and stacked on
top of each other, they can be bound to form a single
booklet.
[Auto]
The pages will be imposed so that when all volumes that
are output are stacked in their folded state, the pages will
be in the correct order. The volumes will be output per 5
sheets when [Booklet Binding] is set to [Fold] while they
will be output per 15 sheets when this is set to [Fold +
Staple].
[1 Sheet], [2 Sheets], [3 Sheets], [4 Sheets], [5
Sheets], [6 Sheets], [7 Sheets], [8 Sheets], [9 Sheets],
[10 Sheets], [11 Sheets], [12 Sheets], [13 Sheets], [14
Sheets], [15 Sheets]
When [Booklet] is set to [OFF], you can configure per
how many sheets the volumes will be separated.
Printouts are output upon being separated per booklet
based on the configured number of pages.
The pages per volume can be set in the range of being
output per 1 to 5 sheets when [Booklet Binding] is set to
[Fold] or a range of being output per 1 to 15 sheets when
this is set to [Fold + Staple].
• In the factory default state, multiple volumes will
be output when the number of pages exceeds 5
sheets when [Booklet Binding] is set to [Fold] or
15 sheets when this is set to [Fold + Staple].
• The staples will not be inserted when multiple
volumes are being output.
• When [Separating Books] is set to other than
[OFF], [Booklet Cover] and [Add Cover] cannot
be used.
ComColor GD Series User's Guide
PS Kit
8
8-47