1. Manuals
  2. Brands
  3. Riso Manuals
  4. All in One Printer
  5. RP3700I
  6. User manual

Riso RP3700I User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

RISO MAKES NO WARRANTY OF ANY KIND WITH REGARD
TO THIS USER'S GUIDE, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. RISO SHALL NOT
BE LIABLE FOR ERRORS CONTAINED HEREIN OR FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE FURNISHING, PERFORMANCE OR
USE OF THIS USER'S GUIDE. RISO ASSUMES NO LIABILITY
FOR DAMAGES RESULTING FROM THE USE OF THE
INFORMATION CONTAINED HEREIN.
FCC Warning
- For RP3700I, RP3790I, RP3500UI, RP3590UI and RP3100UI
Models Only
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own expense.
WARNING
– For RP3700W, RP3790W, RP3500AW, RP3590AW and
RP3100AW Models Only
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING
The Back Light Tube of the LCD of the Control Panel on this model contains mercury
which must be recycled or disposed of as hazardous waste.
Copyright2000 RISO KAGAKU CORPORATION
1

Advertisement

Table of Contents
loading

Related Manuals for Riso RP3700I

Summary of Contents for Riso RP3700I

  • Page 1 RISO MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS USER'S GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. RISO SHALL NOT BE LIABLE FOR ERRORS CONTAINED HEREIN OR FOR...

  • Page 2: Table Of Contents

    Contents Welcome to the RISO RP Series Model ....................5 Introduction to Your RISO Printer Safety Guides - Installation ........................8 Installation ................8 Power Connection ..............9 Knowing the Parts and Components ......................10 The Control Panel .............................12 The Main Display ............................14 Getting Ready to Use Your RISO Printer Paper Recommendations .........................18...
  • Page 3 Basic Features Photo/Half-Tone Processing ........................56 Selecting the Image Processing Mode ......... 56 Producing Enhanced Prints ..........57 Reducing and Enlarging Originals ......................59 Using [Auto] Size Adjustment ..........59 Using [Standard], [Zoom] or [Free] ........60 Adding Margins on Prints .............62 Changing Image Contrast on Prints .......................64 Selecting Printing Paper (For RP3790 and RP3590) ................65 Selecting Paper Automatically ..........65 Selecting Paper Manually .............66...
  • Page 4 Advanced Features Storing Settings in Memory ........................124 Saving the Current Print Job Setting ......... 124 Renaming a Saved Print Job Setting .........127 Erasing a Saved Print Job Setting ........129 Recalling a Saved Print Job Setting ........130 Automatic Sorting into Groups ......................131 Setting Up Single-Original Program ........132 Setting Up Multiple-Original Program .........135 Renaming/Changing a Saved Program Setting ....137...

  • Page 5: Welcome To The Riso Rp Series Model

    About This User's Guide This guide provides all information necessary to use your RISO RP series model. It is designed to help you take advantage of the features built into your RISO RP series model, and provides information on maintenance and troubleshooting.

  • Page 7: Introduction To Your Riso Printer

    ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section provides the basic information about your RISO Printer, including initial installation and names of parts.

  • Page 8: Safety Guides - Installation

    - Extremely bright locations such as locations close to windows or locations that are exposed to direct sunlight (provide a curtain if you have no choice but to install your RISO Printer in such a location)

  • Page 9: Power Connection

    Safety Guides - Installation Power Connection WARNING • Do not overload an electrical outlet or extension cord, nor damage the power cord by placing heavy objects on it or pulling or bending it. Otherwise, a fire or an electric shock might occur. •...

  • Page 10: Knowing The Parts And Components

    nowing the Parts and Components =With the optional ADF Unit= Upper Area Paper Feed Area Main Display ( Master Disposal Box ( p.12 p.170 Holds discarded masters. Control Panel ( p.12 Paper Feed Pressure Adjustment Lever Stage Glass ( p.177 p.20 Stage Cover (...

  • Page 11: Knowing The Parts And Components

    Knowing the Parts and Components Master-Making Area Ink Cartridge Release Button ( Master Roll Cover ( p.165 p.167 Protects the Master Roll. Ink Cartridge Securing Cover ( p.165 Scanner Table Release Lever ( p.167 Print Cylinder (Drum) Handle Unlocks and opens the Scanner Table.

  • Page 12: The Control Panel

    he Control Panel DATA/COPY Ready to Make Master Image Size Contrast Paper PROPERTIES Line 100% Auto Standard Auto Manual Photo Options Advanced MULTIUP>OFF SORTER>OFF AUTO-GO>OFF WAKE-UP A3/Black Volume 13:59 Idle Print Quantity Display Print Quantity Keys (0 to 9 Keys) Counts the number of printed copies.

  • Page 13: The Control Panel

    The Control Panel SPEED FAST SLOW PRINT POSITION DENSITY LIGHT DARK CENTER RESET TEST PRINT START STOP Start Key Print Speed Adjustment Keys p.67 Starts printing or master-making process. The indicator is "GREEN" when the key is active. This key Adjust print speed (on a 1 to 5 scale).

  • Page 14: The Main Display

    he Main Display In the Main Display, various windows appear according to the current operation as illustrated below. Among them, the Main-panel window acts as the home of the multi- window guidance display, indicating the current printer configuration and status. Main-panel window Main-panel window shows two kinds of screens, [Master-making mode] and ○...

  • Page 15: The Main Display

    Ready to Make Master A desired function can be Functions selected from the list ➤ Stack Guide Shift Book Shadow Editor The properties of your RISO Properties ○ ○ ○ ○ ○ Multi-Up Print printer can be changed Side Margin Change ➤...

  • Page 17: Getting Ready To Use Your Riso Printer

    ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes how to set your RISO Printer for initial use, with basic information on printing paper and originals.

  • Page 18: Paper Recommendations

    aper Recommendations Size and Weight Restrictions Usable printing paper is as follows: Using the Standard Paper Feed Tray ⁄ " " × 17" (340 mm × 435 mm) Size: Max. 13 ⁄ Weight: Max. 110-lb index (210 g/m 13-lb bond "...

  • Page 19: Originals

    riginals Size and Weight Restrictions Using the Stage Glass The Stage Glass can be used to print from bound originals or sheet originals. Usable originals are as follows: Size: Max. A3 (297 mm × 420 mm) or Ledger (11" × 17") Weight: Max. 22-lb (10 kg) <...

  • Page 20: Preparing To Print

    reparing to Print Setting Up the Paper Feed Tray Standard Paper Feed Tray Open the Paper Feed Tray. Load printing paper and slide the Feed Tray Paper Guides to fit the paper width. Free Push down the Feed Tray Paper Guide Lock Lock Lock Levers to lock the guides.

  • Page 21: Paper Size

    Preparing to Print Paper Feed Tray 1 and/or 2 (for RP3790 and RP3590 only) Only regular-sized paper (including registered custom paper) in the following range can be loaded into the Paper Feed Trays. Other size/type of paper should be placed on the Standard Paper Feed Tray.

  • Page 22: Adding Or Replacing Paper

    Preparing to Print When loading Ledger size paper, remove NOTE the A3 Top Guide (secured on the inside plate) and secure it on the position illustrated to the right. Secure here Load printing paper. Aligning the center of the paper to the d mark, load printing paper in the Paper Feed Tray.

  • Page 23: Setting Up The Paper Receiving Tray

    Preparing to Print Setting Up the Paper Receiving Tray (Except for RP3790 and RP3590) Open the Paper Receiving Tray. Raise and slide the Receiving Tray Paper Guides to fit the paper width. Holding the Receiving Tray Paper Guide Adjustment Knob, slide the guides. NOTE •...
  • Page 24 Preparing to Print Raise and slide the Paper Stop to fit paper length. Set the Paper Stopper Cushion. Position the Paper Stopper Cushion Knob at either "NORMAL" or "CARD", according to the NORMAL paper to be used. • NORMAL Standard paper CARD •...

  • Page 25: Basic Operation

    Basic Operation ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes the basic operation procedures in the copy mode.

  • Page 26: Safety Guides - Handling And Operation

    Guides - Handling and Operation This section describes the precautions to be observed when handling your RISO Printer. Read this section before operating your RISO Printer. Operation Environment Important! • Operate the unit under the following appropriate environment conditions.

  • Page 27: Basic Processes

    Processes The basic processes of your RISO Printer can be divided into two stages: making a master of an original/PC data (master-making), and then printing copies from the master. Your RISO Printer has been designed so that these two processes flow smoothly from one to the other, with the current action shown clearly in the display.

  • Page 28: Basic Procedure

    Turn the power switch ON. The power switch is located on the lower right side of the machine. – – When your RISO Printer is sleeping in NOTE WAKE-UP the Energy saving mode, the indicator on the Wake-Up key lights. In this case, press the Wake-Up key to wake up your RISO Printer.

  • Page 29: Basic Procedure

    Basic Procedure Place an original on the Stage Glass or in the optional ADF Unit. If placing originals on the Stage Glass, open the Stage Cover and place an original face down. Position the original according to the indicators on the left-hand side of the glass. Close the cover, resting it gently on the original.
  • Page 30 Basic Procedure Press the Start key. Making Master START Image Size Contrast Paper After an original is scanned, a master is created. Line 100% Auto A sample is automatically printed to allow you to Auto Manual Standard check the print quality, position and density. p.69 ..

  • Page 31: Computer Interface Guides

    Computer Interface Guides ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes various operation patterns and functions which are available for printing out the document files created on your computer in the Data mode.

  • Page 32: Connecting To A Computer

    Computer You can connect your RISO Printer to a computer in two ways, i.e. with direct cable connection (Local connection mode) and over the public telecommunication lines (Remote transmission mode). For direct cable connection, the standard parallel port (IEEE 1284A) is provided on your RISO Printer.

  • Page 33: Using The Public Telecommunication Lines

    • This function is available only when the optional Document Memory Card DMC-32 (pre-installed in RP3790) is installed. • Be sure to turn off the modem (or terminal adapter) and the RISO Printer when connecting the cable. • The allowable maximum input / output voltage of the serial port is 12 V.

  • Page 34: Basic Interface Operation

    asic Interface Operation This section explains the basic procedures for direct printing in the data mode. Turn the power switch ON. The power switch is located on the lower right side of the printer. When your printer is sleeping in the Auto NOTE Sleep mode, the indicator on the Wake- Up key lights.

  • Page 35: Basic Interface Operation

    Local Page No. 1 in the accessory software CD-ROM or those of Paper ˚Document 1 the related software. Owner: RISO Page Count: 10Page Receipt Time 09/31/00 15:30 Standard NOTE The dedicated printer driver program,...
  • Page 36 Basic Interface Operation Auto Process Function You can specify how to process print jobs in the Data mode, i.e., to process without interruption or to interrupt print jobs after a specified process step, on the printer. By interrupting print jobs, you can check print position and quality with sample copies before printing process or change the print job flow according to your print requirements.

  • Page 37: Expanding Functions With The Document Memory Card

    xpanding Functions with the Document Memory Card Using the optional Document Memory Card DMC-32 (pre-installed in RP3790), you can enhance the printer’s abilities in the Data mode with additional functions. This chapter provides explanations on the usage and necessary precautions for each of these functions, as well as explaining how to make the various settings.

  • Page 38: Storing File Data

    Expanding Functions with the Document Memory Card Storing File Data GStoring in the Local connection mode The data is stored as shown below in accordance with the output instructions set with the printer driver. Refer to the printer driver’s user’s guide for further details on the various output instructions available.

  • Page 39: Recalling The Storage File

    Expanding Functions with the Document Memory Card Data information other than those listed below will not be recorded when saving file NOTE data in the storage memory. • Print Job Name • Owner • Page Count • Current Date/Time (date and time the data was stored) •...
  • Page 40 Select the desired file data. Storage File Selection Select a Storage File A list of the stored data will be displayed on the window. Leaf RISO 01/31/00 The name of the data (file), the owner’s name and Form2 RISO 01/31/00...

  • Page 41: Specifying The Output Range

    Displays the file name, the owner’s name, the total File Properties Cancel page count and other document details stored, as well Form1 as the date when the storage file was created. Owner RISO Error Recorded 2 [Rotate] button Page Count 10Page Protected Receipt Time 02/11/00 15:30 Activates the 180-degree image rotation function.
  • Page 42 Storage File Selection Storage File Selection File Properties The selected storage file is recalled and the Cancel Main-panel window appears. Form1 Press the Start key to start master-making Owner RISO Page Count 10Page operation. Receipt Time 02/11/00 15:30 Page Size 210X297 Retrieval...

  • Page 43: Clearing File Data From The Storage Memory

    Storage File Selection [File Properties] window. File Properties Cancel Form1 A confirmation message box appears. Owner RISO Refer to step 1 and 2 in the section “Recalling Page Count 10Page Receipt Time 02/11/00 15:30 the Storage File” (page 39) for details on...

  • Page 44: Scanning And Saving Document Data

    Scanning mode. Touch the [Scan] button on the Storage File Selection [Storage File Selection] window. Select a Storage File Leaf RISO 01/31/00 The [File Storage Stage] window appears. • Refer to step 1 in the section “Recalling the Form2 RISO 01/31/00 Storage File”...
  • Page 45 Specify the File Properties for Scanning Scanning Mode File Storage Stage The scanning mode basic window appears. Cancel File Name SCAN000001 Rename Owner RISO Rename Page Size Page Size 13:59 A3/Black Blocked Change the settings for scanning Ready to Scan Data if necessary.
  • Page 46 Expanding Functions with the Document Memory Card When the [Preview] function is NOTE activated, a test print will be created after the scanning operation to allow you to check the scanning result with an actual printout. p.49... Confirming the Scanning Result Place an original on the Stage Glass or in the optional ADF Unit.
  • Page 47 Expanding Functions with the Document Memory Card Touch the [Exit] button on the Ready to Scan Data upper right corner of the window. Scanning Mode Image Size Contrast Paper Line 100% Auto The confirmation message box appears. Options Manual Standard Photo Advanced Advanced...

  • Page 48: Setting Up The Advanced Options In Scanning

    Expanding Functions with the Document Memory Card Setting up the Advanced Options in Scanning Touch the [Advanced] button on Ready to Scan Data the scanning mode basic window. Scanning Mode Image Size Contrast Paper Line 100% Auto The [Advanced Options] window appears. Options Manual Standard...

  • Page 49: Confirming The Scanning Result

    Expanding Functions with the Document Memory Card Confirming the Scanning Result You can check the scanning result with an actual printout (a test print) by activating the [Preview] function. Touch the [Preview] button on the Ready to Scan Data scanning mode basic window. Scanning Mode Image Size...

  • Page 50: Renaming The Scanned Data File And Its Owner

    File Name SCAN000001 Rename The [Rename] window appears. Refer to step 1 in the section “Scanning and Owner RISO Rename Saving Document Data” on page 44 for details Page Size Page Size on the procedure required for displaying the [File Storage Stage] window.

  • Page 51: Customizing The Initial Owner's Name

    Expanding Functions with the Document Memory Card Customizing the Initial Owner’s Name You can customize the initial owner name which is automatically allocated to the data file created. Display the [Properties] window. Properties Scanning Mode Refer to the steps 1 to 2 in the section “Customizing the Initial Settings”...
  • Page 52 Expanding Functions with the Document Memory Card Touch the [Owner Name Entry] Properties button. Scanning Mode RMT Error Transact Pause The [Rename] window appears. Copy Mode Serial Com. Speed 115200bps AT Command Output Data Mode System Owner Name Entry P.2/10 A3/Black Idle 13:59...

  • Page 53: Changing The Data Mode Configuration

    hanging the Data Mode Configuration You may be required to change the Data mode configuration according to your operation requirements for printing out the document data sent from the computer. The following items can be configured on the Main Display. For the detailed descriptions and procedures, refer to the chapter “Customizing the Initial Settings”...

  • Page 55: Basic Features

    Basic Features ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes how to select the best image processing mode in accordance with the original type, as well as the functions that can be set up in the Main-panel window or with the control panel keys.

  • Page 56: Photo/Half-Tone Processing

    Main-Panel hoto/Half-Tone Image Processing If an original contains photographs or half-tone images, or a multi-colored original is used, select [Photo] or [Duo] processing. Selecting the Image Processing Mode Touch either the [Duo] Button or the Ready to Make Master [Photo] Button on the Main-panel Image Size Contrast...

  • Page 57: Producing Enhanced Prints

    Photo/Half-Tone Processing Producing Enhanced Prints You can enhance photograph or half-tone images on an original copy in two ways: adjusting shades in images and processing images with a dot screen. This feature is not available in the [Line] NOTE processing mode. Touch the [Advanced] button.
  • Page 58 Photo/Half-Tone Processing [Lighter] For photographs that have too dark shades, select this setting. The contrast in the dark-shade areas will be enhanced to reproduce clearer images. [Darker] For photographs that have too light shades, select this setting. The contrast in the light-shade areas will be enhanced to reproduce clearer images.

  • Page 59: Reducing And Enlarging Originals

    Main-panel educing and Size Enlarging Originals Originals can be reduced or enlarged, using the following functions. p.124... Reproduction percentage can be adjusted and saved in memory for quick recall. [Auto] (Except for RP3100) [Margin +] You can reduce the original to between 90% and 99%. The enlargement/reduction ratio is automatically calculated from the sizes of original and printing This option is useful when you want to add margins...

  • Page 60: Using [Standard], [Zoom] Or [Free]

    Reducing and Enlarging Originals Using Other Options : [Standard], [Zoom] or [Free] Touch the [Options] button in the Ready to Make Master [Size] column on the Main-panel Image Size Contrast Paper window. Line 100% Auto Auto Manual Standard The [Reproduction Options] window appears. Photo Options Advanced...

  • Page 61: Reducing And Enlarging Originals

    Reducing and Enlarging Originals Specify a desired reproduction size. =[Standard]= Ready to Make Master Ready to Make Master Select the current original size. Reproduction Options Cancel • This option is not available when any NOTE non-standard-sized original or printing Standard Zoom Free paper is used.

  • Page 62: Adding Margins On Prints

    Reducing and Enlarging Originals Touch the [OK] button. Ready to Make Master Cancel Reproduction Options The window returns to the Main-panel window. The current reproduction ratio will be displayed Standard Zoom Free below the [Options] button. 8 0 % Touch the [100%] button to return to the NOTE (50%~200%) original size (100%).
  • Page 63 Reducing and Enlarging Originals Touch the [OK] button. Ready to Make Master Reproduction Options Cancel The display returns to the Main-panel window. Standard Zoom Free • The [Margin +] icon ( ) will be displayed <Original> <Paper> below the [Options] button once this option has B5 (163%) A3 (100%) been activated.

  • Page 64: Changing Image Contrast On Prints

    Main-panel hanging Image Contrast Contrast on Prints To achieve different tones on printed copies from those of an original, adjust the scanning contrast. [Auto] The scanning contrast will be adjusted automatically according to the darkness of the original scanned. [Manual] The scanning contrast can be selected manually.

  • Page 65: Selecting Printing Paper (For Rp3790 And Rp3590)

    Main-panel electing Paper Printing Paper (For RP3790 and RP3590) Desired paper can be automatically selected for printing when several types/sizes of paper are loaded in the Multi tray paper feeder. You can also select a desired paper size manually. [Auto] Automatically selects a paper feed tray (Standard Tray, Tray 1 or Tray 2) depending on the combination of the reproduction size and original size .

  • Page 66: Selecting Paper Manually

    Selecting Printing Paper Selecting Paper Manually Touch the [Manual] button in the Ready to Make Master [Paper] column on the Main-panel Image Size Contrast Paper window. Line 100% Auto Auto Auto Manual Manual The [ h ] [ j ] buttons and the Paper Feed Tray Photo Options icons appear with the corresponding paper size...

  • Page 67: Changing Print Speed

    hanging Print Speed Printed speed can be set at any five levels, ranging between 60 and 120 sheets per minute. Press the Print Speed Adjustment Keys to change print speed. Print Speed Indicator Indicates the current print speed level. SPEED SLOW FAST SPEED...

  • Page 68: Changing Print Density

    hanging Print Density Print density can be set at any of five levels. Press the Print Density Adjustment keys to change print density. Print Density Indicator. Indicates the current print density level. SPEED DENSITY SLOW FAST 1 2 3 4 5 LIGHT DARK 1 2 3 4 5...

  • Page 69: Repositioning The Print

    epositioning the Print The print position can be adjusted vertically (up and down) and horizontalty (to the right and left). The allowable range is ±10mm (± ⁄ "). Print position can be adjusted during printing without stopping the operation by pressing the Print Position Adjustment keys (except for the Print Position Center key).
  • Page 70 Repositioning the Print Horizontal Print Position Shift Vertical Print Position Shift 10. 0mm 10. 0mm Repositioned Print Position Image Initial position Fine [Recall] button [Fine] button Recovers the print position specified for the previous Changes the per-step shift distance to half of the page (original) position.

  • Page 71: Automatic Printing (Auto Process)

    Main-panel utomatic Printing AUTO-GO (Auto Process) If you do not need to check print samples before making prints, touch the [AUTO-GO] button before pressing the Start key to activate the Auto Process feature. This feature enables nonstop operation from master- making through printing.

  • Page 72: Producing Proof Copies

    roducing Proof Copies If changes have been made to the print position and other TEST settings, check the print quality by producing proof copies. PRINT By holding down the Test Print key, you can print continuously. Test printing does not affect the quantity in the NOTE Print Quantity Display.

  • Page 73: Extending The [Reserved] Period

    Main-panel xtending the Aux. Menu [Reserved] Period A certain period is provided as reserved time on the printer after a print job is finished, preventing received PC data from being processed for printing. During the reserved time, you can make additional copies from the current master. The reserved period can be extended according to the requirements of the current print job.

  • Page 74: Changing Print Job Flow

    (Master)] is not selected as process flow with the printer driver. Ready to Make Master The print job flow can be changed in both process modes, Local Page No. 1 “master-making” and “printing”. Paper ˚Document1 Owner RISO Page Count 10Page Receipt Time 09/31/00 15:30 Standard Page Size (210X297) Skip Page Clear All SORTER>OFF AUTO-GO>OFF...

  • Page 75: Skipping The Current Page

    Skipping the Current Page Touch the [Skip Page] button. Ready to Make Master Local Page No. 01 Paper Document1 The confirmation message box appears. Owner RISO Page Count 10Page Receipt Time 09/31/00 15:30 Standard Page Size (210X297) Skip Page Clear All SORTER>OFF AUTO-GO>OFF...

  • Page 76: Canceling The Current Print Job

    Canceling the Current Print Job Touch the [Clear All] button. Ready to Make Master Local Page No. 01 Paper ˚Documnet1 The confirmation message box appears. Owner RISO Page Count 10Page Receipt Time 09/31/00 15:30 Standard Page Size (210X297) Skip Page Clear All SORTER>OFF AUTO-GO>OFF...

  • Page 77: Confirming Current Settings

    onfirming Current Settings You can check the current settings of the print job. This combination of settings can also be registered in the memory for quick recall. Press the Properties key. DATA/COPY PROPERTIES PROPERTIES A list of the current settings of the print job will be displayed.

  • Page 79: Standard Features

    ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes the features that enhance your RISO printer.

  • Page 80: Idling Action

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] widow appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 81: Reproducing Bound Documents

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 82: Reproducing Bound Documents

    Reproducing Bound Documents Select the process mode desired. Ready to Make Master Book Shadow Editor Cancel Touch the [Erase] button or the [Halftone] button. The spine shadow of Erase an opened book original can be erased or Halftone Erases the book spine shadow Erase lightened O F F...

  • Page 83: Renewing Masters

    Main-panel enewing Masters Aux. Menu You can renew (remake) a master from the most recently scanned/developed page data. Besides, the Image rotation feature is selectable in the Data mode. Important! • The [Renew Page] function is not available in the following cases. - After turning on the Main Power switch or pressing the Reset key.

  • Page 84: Protecting Confidential Documents

    Ready to Make Master Local Page No. 1 sub-panel window, and then touch the [Functions] button. A desired function can be Functions selected from the list The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 85: Protecting Confidential Documents

    Protecting Confidential Documents Press the Start key. SPEED SLOW FAST PRINT 1 2 3 4 5 POSITION DENSITY LIGHT DARK 1 2 3 4 5 CENTER The current master is discarded and replaced with RESET TEST PRINT a blank one. START START STOP...

  • Page 86: Printing Originals Side By Side

    Sub-panel rinting Originals Catalog Side by Side [Multi-Up Printing] The same or different originals can be printed side by side and, if required, each original can have different settings: reproduction size (Reduce/Enlarge), scanning contrast and processing (Line/Photo/Duo). You can select how they are arranged side by side on a single sheet, from the following pattern: 2-by-1 (2UP), 2-by-2 (4UP), 4-by-2 (8UP) and 4-by-4 (16UP).
  • Page 87 Printing Originals Side by Side [Multi-up Ticket] A A A A A A single original is only available for the [Multi-Up Ticket] feature. <Reference Charts for Multi-Up Printing Operation> Refer to the charts below for the combinations of the respective Multi-Up patterns: original size, printing paper size and size adjustment requirement.

  • Page 88: Printing Originals Side By Side

    Printing Originals Side by Side = Metric Models = [2UP / 8UP] Original Original Size Placement Direction 100% 116% 141% 163% Printing 100% 122% 141% Paper 100% 116% 050% Size 100% [4UP / 16UP] Original Original Size Placement 16UP Direction 100% 116% Printing...

  • Page 89: Printing Originals Multi-Up

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...
  • Page 90 Printing Originals Side by Side Specify the [Multi-Up Interval] Ready to Make Master when necessary. Cancel Multi-Up Print Multiple pages can be When multiple originals are used in the Multi-Up Printed on a sheet 16UP printing feature, place them on the Stage Glass [Page Direction] individually.

  • Page 91: Adf Unit

    Printing Originals Side by Side Touch the [OK] button. Ready to Make Master Cancel Multi-Up Print The [Functions] window appears again. Multiple pages can be Printed on a sheet 16UP [Page Direction] Ticket Size Paper 1 0 0 % Interval A3/Black 13:59 Idle...
  • Page 92 Printing Originals Side by Side Make other necessary settings. • The following functions can be specified for each original. NOTE - Image processing ([Line], [Duo], [Photo], [Dot], etc.) - Scanning contrast adjustment. - Reproduction size (Reduction/Enlargement) • You can recall the saved settings quickly. p.124...

  • Page 93: Printing Tickets

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...
  • Page 94 Printing Originals Side by Side Touch the [Ticket] button. Ready to Make Master Multi-Up Print Cancel The [Multi-Up Ticket] window appears. Multiple pages can be Printed on a sheet 16UP [Page Direction] Ticket Size Paper 1 0 0 % Interval A3/Black 13:59 Idle...
  • Page 95 Printing Originals Side by Side Touch the [OK] button. Ready to Make Master Multi-Up Tickets Cancel The window returns to the [Multi-Up Print] window. The width of tickets can be specified 1 0 0 (50mm~210mm) A3/Black 13:59 Idle Touch the [OK] button again. Ready to Make Master Multi-Up Print Cancel...
  • Page 96 Printing other Originals Side by Side Make other necessary settings. • The following functions can be specified for each original. NOTE - Image processing ([Line], [Duo], [Photo], [Dot], etc.) - Scanning contrast adjustment - Reproduction size (Reduction/ Enlargement) Press the Start key. SPEED SLOW FAST...

  • Page 97: Changing Printing Paper Information

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 98: Changing Printing Paper Information

    Changing Printing Paper Information Touch the [Paper Data Entry] Ready to Make Master button. Close Functions The [Paper Data Entry] window appears. Paper Data Entry Stack Guide Adjust Job Separation Jump Wing Control D-Feed Check Regist. Mark Skip P.2/3 A3/Black 13:59 Idle Touch the Paper Size button.
  • Page 99 Changing Printing Paper Information Touch the Paper Type button. Ready to Make Master The [Paper Type Entry] window appears. Paper Data Entry Close Size Type Finish Standard-T Standard Standard Standard Standard Feed Tray1 Standard Standard Feed Tray2 A 3/Black 13:59 Idle Touch the required Paper Type Ready to Make Master...
  • Page 100 Changing Printing Paper Information Touch the required Paper Finish button. When the optional utility software, RISO- MONITOR, is used, the information specified in this window can be confirmed with your personal computer. For detailed information about the RISO- MONITOR, refer to the dedicated operation guide.

  • Page 101: Preventing Paper Feed/Ejection Error

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 102: Controlling The Jump Wings

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...
  • Page 103 Preventing Paper Feed/Ejection Error Touch the [Jump Wing Control] Ready to Make Master Ready to Make Master button. Functions Close The [Jump Wing Control] window appears. Paper Data Entry Stack Guide Adjust Job Separation Jump Wing Control Jump Wing Control D-Feed Check D-Feed Check Regist.
  • Page 104 Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 105: Adjusting The Auto-Control Stacking Tray

    Adjusting the Auto-Control Stacking Tray Touch the desired buttons for the Ready to Make Master fine adjustment. Close Stack Guide Adjust The Paper Guides and Paper Stop will move in increments of 1mm (approx. ⁄ ") whenever the buttons are touched. •...

  • Page 106: Skipping The Registration Mark

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...
  • Page 107 Skipping the Registration Mark Touch the [Regist. Mark Skip] Ready to Make Master button. Close Functions The [Regist. Mark Skip] window appears. Paper Data Entry Stack Guide Adjust Job Separation Jump Wing Control D-Feed Check Regist. Mark Skip P.2/3 A3/Black 13:59 Idle Set the scanning start position (the...

  • Page 108: Adjusting The Side Margins

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...
  • Page 109 Adusting the Side Margins Touch the [Side Margin Change] Ready to Make Master Ready to Make Master button. Functions Close The [Side Margin Change] window appears. Side Margin Change Side Margin Change Stack Guide Adjust Halftone Curve Adj Mirror Image Print Image Editing Meter Display P .3/3...

  • Page 110: Producing Enhanced Photo Images

    Page No. 1 sub-panel window and then touch the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog...

  • Page 111: Producing Enhanced Photo Images

    Producing Enhanced Photo Images Touch the [ h ] or [ j ] button on the Ready to Make Master function to be adjusted. Halftone Curve Adj Cancel <Highlights> <Shadows> The [Highlights] parameter adjusts the light areas The highlight level of The shadow level of subject to strong light rays on the photograph, and original photo images...

  • Page 112: Reversing Images

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 113: Confirming The Usage Count Of The Printer

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 114: Changing Process Flow On The Printer

    Ready to Make Master Main-panel window. Local Page No. 1 ˚Document 1 Paper Owner RISO Page Count 10Page Each time you touch the button, the status of the function Receipt Time 09/31/00 15:30 Standard is switched between [ON] and [OFF] .

  • Page 115: Setting Up Semi-Auto Process

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list. The [Functions] window appears. The properties of your RISO Properties printer can be changed. Selections Job List Program Catalog A3/Black...

  • Page 116: Rotating Images By 180 Degrees

    Local Page No. 1 the [Functions] button. A desired function can be Functions selected from the list The [Functions] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog A3/Black...

  • Page 117: Recalling Functions Quickly

    Ready to Make Master sub-panel window and then touch the [Properties] button. A desired function can be Functions selected from the list The [Properties] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog...
  • Page 118 Recalling Functions Quickly Select the function button for the Properties registration of functions. Copy-Md-Selections Touch the [Copy-Md-Selections] button for the Copy Mode Image Processing Line Copy mode or the [Data-Md-Selections] button for the Data mode. Data Mode Scanning Contrast Auto Then the [Copy-Md-Selections] or [Data-Md- System Reproduction Size...
  • Page 119 Recalling Functions Quickly Touch the button of the function to Properties be registered. Entry-Choice 8 Cancel Select a Function to be Listed If the required button is not displayed on the (No Entry) Idling Action window, touch the [ h ] and [ j ] buttons to scroll through the list.
  • Page 120 Recalling Functions Quickly Touch the [Exit] button on the Properties upper right corner of the window. Copy-Md-Selections The setting change will be confirmed. Copy Mode Image Processing Line • The button of the function registered in the selected [Choice] frame will appear in the Data Mode Scanning Contrast Auto...

  • Page 121: Changing Registered Functions

    Recalling Functions Quickly Changing Registered Functions Touch the [Choice] frame whose Properties function to be changed in the [Copy Close Copy-Md-Selections (or Data) -Md-Selections] window. The function entry window appears for the Choice1 Book Shadow Editor selected [Choice] frame. Side Margin Change Choice2 •...
  • Page 122 Recalling Functions Quickly Touch the [OK] button. Properties Cancel Entry-Choice 4 The name of the selected function will be Select a Function to be Listed displayed beside the corresponding [Choice] frame. Semi-Auto (Master) D-Feed Check Paper Data Entry Stack Guide Adjust Touch the [Cancel] button to cancel the NOTE Job Separation...

  • Page 123: Advanced Features

    Advanced Features ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes advanced features that may be used for advanced needs.

  • Page 124: Storing Settings In Memory

    toring Settings in Memory Sub-Panel Job List The Print Job Memory feature is a flexible tool for automating frequently used or complicated combinations of settings for print jobs. You can store up to 24 combinations of frequently used or complex print-job settings and apply them to new print jobs whenever necessary.
  • Page 125 Storing Settings in Memory Press the Properties key. DATA/COPY PROPERTIES PROPERTIES The [Current Job Design] window appears. WAKE UP [Current Job Design] window You can confirm the current print settings on the Main Display when the Properties key is pressed. •...
  • Page 126 Storing Settings in Memory Touch a vacant [Memory Frame] Ready to Make Master button. Job List Entry Close Select a Memory Frame for Current Print Job The settings confirmed on the [Current Job Register Design] window will be registered in memory, and a message [(memory name)-Occupied] will be Rename displayed.

  • Page 127: Renaming A Saved Print Job Setting

    Storing Settings in Memory Renaming a Saved Print Job Setting Press the Properties key. DATA/COPY PROPERTIES PROPERTIES The [Current Job Design] window appears. WAKE UP Touch the [Job List Entry] button. Current Job Design Close The [Job List Entry] window appears. Image Processing Photo Scanning Contrast...
  • Page 128 Enter a new name for the selected print job setting. Rename Cancel Shift [RISO NEWS The [Rename] window can be switched between the uppercase window and the lowercase window by touching the [Shift] button. • Up to ten spaces can be entered.

  • Page 129: Erasing A Saved Print Job Setting

    A message [Select a Memory Frame to be Select a Memory Frame to be Cleared Cleared] appears. • Only the Memory Frame buttons which are Register RISO NEWS occupied with print job settings can be selected. Rename • If desired Memory Frame button is not Clear displayed on the window, scroll through the list by touching the [ h ] or [ j ] button.

  • Page 130: Recalling A Saved Print Job Setting

    Select a Memory Frame for Current Print Job The print job settings registered in the selected Memory Frame is erased, and a message [(job Clear This Memory Frame? name)-Cleared] appears. RISO NEWS Rename The name of the Memory Frame will NOTE Cancel Clear return to the default.

  • Page 131: Automatic Sorting Into Groups

    utomatic Sorting Sub-panel Program into Groups p.124 ... Frequently used combinations of The Programed Printing feature can be used to print and sort printed sheets into various groups automatically. settings can be saved in memory for One of two programed printing methods, "Single-original quick recall.

  • Page 132: Setting Up Single-Original Program

    Automatic Sorting into Groups Setting Up Single-Original Program Display the [Program] tab on the Ready to Make Master sub-panel window and then touch Select a Register Frame for a Program the [Register] button. Retrieve Register A message stating [Select a Register Frame for a Change Program] appears.
  • Page 133 Automatic Sorting into Groups Input the number of copies to be Enter Print Quantity and Set Number printed for each cluster of the first Single Page Mode Cancel group using the Print Quantity Cps. Sets Cps. Sets P - 1 keys.
  • Page 134 Enter Print Quantity and Set Number Cancel Single Page Mode The current program settings will be registered in the memory, and can be recalled and used for Cps. Sets Cps. Sets RISO NEWS subsequent printing jobs. Rename Clear All [Total] 200- P.1/4 A3/Black 13:59...

  • Page 135: Setting Up Multiple-Original Program

    Automatic Sorting into Groups Setting Up Multiple-Original Program Display the [Program] tab on the Ready to Make Master sub-panel window and then touch Select a Register Frame for a Program the [Register] button. Retrieve Register A message stating [Select a Register Frame for a Program] appears.
  • Page 136 Automatic Sorting into Groups Press the [q] key. Enter Print Quantity Multi-Page Mode Cancel The cursor moves to the next field. Cps. Cps. P - 2 You can select the [Cps.] field by NOTE Rename 1 Page 4 Page touching the relevant field directly. Clear All 2 Page 5 Page...

  • Page 137: Renaming/Changing A Saved Program Setting

    Automatic Sorting into Groups Renaming/Changing a Saved Program Setting Display the [Program] tab on the Ready to Make Master sub-panel window and then touch Select a Program to be Changed the [Change] button. Retrieve Register A message [Select a Program to be Changed] Change appears.
  • Page 138 Enter a new name for the selected program setting. Rename Cancel Shift [RISO NEWS The [Rename] window can be switched between the uppercase window and the lowercase window by touching the [Shift] button. • Up to ten spaces can be entered.

  • Page 139: Erasing A Saved Program Setting

    Ready to Make Master sub-panel window and then touch Select a Program to be Cleared the [Clear] button. Retrieve RISO NEWS Register A message [Select a Program to be Cleared] Change appears. • Only the occupied Program buttons can be Clear P.1/4...

  • Page 140: Recalling A Saved Program Setting

    Display the [Program] tab on the Ready to Make Master sub-panel window and then touch Select a Program to be Retrieved the [Retrieve] button. Retrieve RISO NEWS Register A message stating [Select a Program to be Change Retrieved] appears. Clear P.1/4...
  • Page 141 Automatic Sorting into Groups Set an original face-down in place. If placing originals on the Stage Glass in the Multiple-original Program, set the originals in position from the last page (printing will be performed from the last page to the first page). If the optional ADF Unit is installed, all NOTE originals can be printed in sequence in...
  • Page 142 In this event, set the originals of the following pages in place and then press the Start key. The following options can be selected on the Ready to Print Main-panel window in the Single-original RISO NEWS 4G1St Program. Aux.Menu Print Position Paper 10.
  • Page 143 Automatic Sorting into Groups About the Job Separator (optional) This is a useful optional device for program printing. It automatically separates the print jobs by inserting paper strips as specified in the current program printing. If you use this equipment, you do not need to handle printed copies in the Paper Receiving Tray to separate them as programed.

  • Page 144: Using Custom Paper

    Ready to Make Master sub-panel window and then touch the [Properties] button. A desired function can be Functions selected from the list The [Properties] window appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog...
  • Page 145 Using Custom Paper Touch the [Custom Paper Entry] Properties button. Custom Paper Entry The main [Custom Paper Entry] window appears. Copy Mode Energy Saving Mode 5 mn Data Mode Power-OFF Schedule 22:00 System Idling Action 12 hour P.7/10 A3/Black 13:59 Blocked Touch the [Register] button.

  • Page 146: Changing Settings And Names Of Custom Paper Sizes

    Using Custom Paper Touch the [OK] button. Properties Cutom Paper Entry Cancel The window returns to the main [Custom Paper Entry] window. Touch the [Cancel] button to cancel the 1 2 6 mm registration of the current custom paper size. (90mm~340mm) 1 8 6 Rename...
  • Page 147 Using Custom Paper Display the [Custom Paper Entry] Properties button by touching the [ h ] or [ j ] button. Custom Paper Entry Copy Mode Energy Saving Mode 5 mn Refer to the section [Customizing the Initial Data Mode Power-OFF Schedule 22:00 Settings] for further details on the [Properties]...

  • Page 148: Paper Size Setting

    Using Custom Paper Change the paper size. Properties Cutom Paper Entry Cancel Change the paper length and width with the [ c ] [ d ] buttons or the Print Quantity keys. 1 0 3 mm • To shift the cursor, press the [q] key or (90mm~340mm) touch the relevant field directly.
  • Page 149 Using Custom Paper Touch the [OK] button. Rename Cancel The window returns to the [Custom Paper Entry] window. Shift [Card A The name of the selected paper size now changes to the new one. < > A3/Black 13:59 Blocked Touch the [OK] button again. Properties Cutom Paper Entry Cancel...

  • Page 150: Erasing Registered Custom Paper Sizes

    Using Custom Paper Erasing Registered Custom Paper Sizes Display the [Properties] window. Properties Refer to the step 1 of [Registering Custom Paper Copy-Md-Selections Sizes] on page 144. Copy Mode Image Processing Line Data Mode Scanning Contrast Auto System Reproduction Size 1-to-1 P.1/10 A3/Black...
  • Page 151 Using Custom Paper Touch the Paper Size Frame button Properties to be erased. Close Custom Paper Entry Select a Paper Size Frame to be Cleared Only buttons in which a custom paper size is Register CardA registered can be selected. Change Clear A3/Black...

  • Page 152: Printing On Envelopes

    Using Custom Paper Printing on Envelopes You can feed envelopes by changing the position of the Standard Paper Feed Tray. Important! Be sure to return the Standard Paper Feed Tray to the normal position after printing on envelopes. Register the size of envelope. Register the size of the envelope to be used in the [Properties] window.

  • Page 153: Start The Print Job

    Using Custom Paper w Slide the Feed Tray Paper Guides so that they fit the envelopes, and lock them. eSet the Paper Feed Pressure Adjustment Lever to [Card]. Free Lock Lock Set the original in place. You can select the image rotation feature if necessary. p.116...

  • Page 154: Customizing The Initial Settings

    Display the [Catalog] tab, and Ready to Make Master then touch the [Properties] button. A desired function can be Functions selected from the list The confirmation message box appears. The properties of your RISO Properties printer can be changed Selections Job List Program Catalog...

  • Page 155: Customizing The Initial Settings

    Customizing the Initial Settings Select the function whose initial Properties setting is to be changed. Copy-Md-Selections The functions whose initial setting can be changed Copy Mode Image Processing Line will be displayed on the [Properties] window. Data Mode Scanning Contrast Auto •...
  • Page 156 Customizing the Initial Settings Change the initial settings. Properties Cancel Image Processing The setup method varies depending on the function. This configuration is applied • Touch the [ h ] and [ j ] buttons or directly touch Line as initial machine status. one of the option buttons displayed in the window.

  • Page 157: Configurable Functions And Their Options

    Customizing the Initial Settings Configurable Functions and Their Options The functions for which the initial settings can be changed are shown below. The framed option is the default initial setting. Some functions will not be displayed on the [Properties] window depending on the printer model and the configuration of optional devices.
  • Page 158 Customizing the Initial Settings Functions and Descriptions Options Category and Reference Data Mode Controller Link ON, OFF Selects if to connect to the external printer controller. Select [ON] when the controller is > connected. The [PC-LINE ] button will be displayed in the action area of the data mode window when this function is activated.
  • Page 159 Customizing the Initial Settings Functions and Descriptions Options Category and Reference Fine Adjust Mode ON, OFF System p.69 Selects the initial status of the fine adjustment mode Repositioning the of the print position. The print position will be Print adjusted in increments of 0.25mm with a press of the Print Position Adjustment key when [ON] is selected.
  • Page 160 Customizing the Initial Settings Functions and Descriptions Options Category and Reference ON , OFF Feed Tray Relay (For RP3790 and RP3590 only) System p.65 Selects if the [Feed Tray Relay] feature, which Selecting Paper makes Paper Feed Trays feed paper in Automatically sequence, is to be activated.
  • Page 161 Customizing the Initial Settings Functions and Descriptions Options Category and Reference Serial Com. Speed 115200bps , 57600bps, 38400bps, Data Mode Selects the serial communication speed between 19200bps, 9600bps, 4800bps, the printer and the data receiving device for the 2400bps Remote transmission mode. (Available only for the Remote transmission mode) See the List below AT Command Output...

  • Page 163: Replenishing And Disposing Consumables

    Replenishing and Disposing Consumables ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes how to replenish supplies and dispose of them regularly.

  • Page 164: Checking Remaining Amounts Of Consumables

    hecking Remaining Amounts of Consumables (Except for RP3100) You can check the remaining amount of paper, ink and master on the Main Display. The amount of space remaining in the Master Disposal Box can also be verified. The [!Volume!] button will not be displayed if all NOTE consumable items are fully loaded on the printer and the Master Disposal Box is empty at the...

  • Page 165: Replacing The Ink Cartridge

    eplacing the Ink Cartridge Open the Front Cover. Open the Ink Cartridge Securing Cover. Unlock the cover by pressing the Ink Cartridge Release Button. Pull the empty Ink Cartridge out of the Ink Cartridge Holder. Remove the cap from a new Ink Cartridge.
  • Page 166 Replacing the Ink Cartridge Insert the new Ink Cartridge into the Print Cylinder (Drum). Align the arrow on the Ink Cartridge with the d mark on the Print Cylinder (Drum) and push the Ink Cartridge until it stops. Close the Ink Cartridge Securing Cover.

  • Page 167: Replacing The Master Roll

    eplacing the Master Roll Raise the Scanner Table. Hold the Scanner Table Release Lever and raise the Scanner Table until it stops. Open the Master Roll Cover. Pull down the Master Roll Cover. Open the Master Making Unit. Open the Master Making Unit by pulling down either of the green Master Making Unit Release Levers, which are located on the left and right side of the unit.
  • Page 168 Replacing the Master Roll Remove both left and right flanges. Remove both left and right flanges from the depleted Master Roll. Save the flanges for the replacement NOTE roll. Attach the existing flanges to a new Master Roll. Unpack a new Master Roll. Attach the flanges removed from the depleted Master Roll to the new one, with the colored flange Colored Flange...
  • Page 169 Replacing the Master Roll Close the Master Making Unit and the Master Roll Cover gently. Close the Scanner Table. Push down the Scanner Table gently.

  • Page 170: Emptying The Master Disposal Box

    mptying the Master Disposal Box Pull out the Master Disposal Box. Hold the handle of the Master Disposal Box and pull out the box. Discard used masters. Press the lever located on the handle if masters adhere to the inside of the Master Disposal Box. Insert the Master Disposal Box into position.

  • Page 171: Changing Print Color

    Print Color To print with an optional color Cylinder (Drum), simply remove the existing Cylinder (Drum) from your RISO Printer and replace with the color of choice. Caution Only use RISO RP Print Cylinder (Drum). NOTE • Change Print Cylinder (Drum) with the power ON.
  • Page 172 Changing Print Color Pull out the Print Cylinder (Drum). Grasp the Print Cylinder (Drum) Handle and pull out the Print Cylinder (Drum) until it stops. Remove the Print Cylinder (Drum) from the unit. Lift the Print Cylinder (Drum) with both hands to remove it.

  • Page 173: Changing Print Color

    Changing Print Color Close the Front Cover. Caution The Print Cylinder (Drum) contains highly sensitive electronic components. To avoid damage by an electrostatic charge, do not touch the Print Cylinder (Drum) Connector. Connector Changing Print Cylinder (Drum) types When the Print Cylinder (Drum) type is changed, the [Print !!The Print Drum Type has been Changed!! Select the Current Print Drum Type Drum Type] window will be displayed and the message on the...

  • Page 175: Maintenance

    ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section describes the actions to be taken to maintain your RISO Printer in proper working order.

  • Page 176: Safety Guides - Maintenance

    • Precision parts and driving mechanisms are contained in the unit. Do not perform actions other than those described in this manual. • Don't make any modifications to the unit or remove parts. • Neither RISO nor its dealer is responsible for maintenance service performed by non-RISO-authorized personnel. Replacing the Lithium Battery The lithium battery in your machine should last about five years.

  • Page 177: Cleaning

    leaning Thermal Print Head Clean the Thermal Print Head after every two Master rolls. Lift up the Scanner Table and open the Master Making Unit. Then gently wipe the Thermal Print Head (inside the unit) several times with a soft cloth or tissue. For more effective cleaning, dampen a soft cloth NOTE or tissue with a small amount of alcohol before...

  • Page 178: Printer Exterior

    Cleaning Printer Exterior To remove dust, wipe the machine exterior periodically with a soft cloth. To remove stains, use an appropriate cleanser recommended by your authorized service representative. Caution The machine exterior is plastic. Never use alcohol or solvent for cleaning. Optional ADF Scanner Glass and White Roller Open the Optional ADF Unit Table.

  • Page 179: Troubleshooting

    ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section shows you how to take care of problems that may arise in relation to operations on your RISO Printer. Check the related item and follow the instruction before calling your authorized service representative.

  • Page 180: Advisory Messages

    dvisory Messages This section shows you the required actions for the advisory messages possibly shown on the Main Display. When any of these advisory messages are displayed, refer to the following list and take the relevant recovery measures accordingly. Error Messages Recovery measures will be shown with messages and graphics depending on the type of the error.
  • Page 181 Advisory Messages T00-000: Requires Technical Assistance Message Description Action Image Scanner is Locked!! Trouble has occurred with Contact your authorized service Unlock it the Image Scanner. representative and advise them of the advice code displayed. !!System Error!! An error has occurred in the Contact your authorized service Press Reset Key system.
  • Page 182 Advisory Messages D00-000: Check Settings Message Description Action Close Disposal Top Cover The Master Disposal Unit is Open the Scanner Table and close the not correctly closed. Master Disposal Unit securely. Close Feed Joint Passage Cover The Feed Joint Passage Open the Front Cover and close the Cover is not correctly closed.
  • Page 183 Advisory Messages B00-000: Errors in Optional Devices Message Description Action Close Sorter’s Cover The sorter’s (optional) cover Close the sorter’s cover. is open. Check Sorter’s Panel Display An error has occurred with Check the panel on the sorter. (Refer the sorter (optional.) to the sorter user’s manual for details on operating the sorter.) Insert Card in Key/Card Counter...
  • Page 184 Advisory Messages Message Description Action Master Mis-Feed Master has misfed. Open the Master Making Unit and wind Rewind Master Roll and the master roll. Then reset master in Reset Master in Place place. Press the Start key to resume operation. p.167...
  • Page 185 Advisory Messages G01-0451: Paper Jam The following message will be displayed when documents or paper are jammed inside the ADF unit (optional) or the printer. Paper Jam Check Indicated Areas and Press [OK] button The place where paper jam has occurred will be shown by the flashing mark on the graphic. If an error has occurred, refer to the relevant column below and take action accordingly.
  • Page 186 Advisory Messages Location and Description Action Open the Front Cover, pull out the Print Cylinder (Drum), and remove the paper. p.171... Changing Print Cylinders (Drums) Caution Paper Separation Hook Take extra care not to hurt your hand by the sharp tip of the Paper Separation Hook when removing the paper jammed inside the unit.
  • Page 187 Advisory Messages = For RP3790 and RP3590 only = Location and Description Action Draw the Paper Feed Tray 1 (or 2) and remove the jammed paper. Paper has jammed in the Paper Feed Tray 1 ( or 2). q Open the Multi-Tray Transfer Unit.

  • Page 188: Warning Messages

    Advisory Messages Warning Messages The various warning messages will be displayed in the Message Boxes or in the Message area on the Main Display. Message area Place Another Original Ready to Make Master To Cancel, Press Stop Key Image Size Contrast Paper Line...
  • Page 189 Advisory Messages Message Description Action !!No Auto Paper Size Irregular size original has been Select [Manual] on the [Paper] field or Selection with Irregular set while the [Auto paper size set the original correctly. p.65... Selecting Printing Paper Size Original !! selection] option is selected, Select Paper Size or the original is not placed...
  • Page 190 Advisory Messages Message Description Action !!The Data Storage Area There is no space left in the Erase unwanted storage data to has Become Full!! storage memory. receive next data. Clear Old Storage Data To continue operation, touch the [Close] button or press the Reset key. !!The Image Resolution The resolution of the •...
  • Page 191 Advisory Messages Warning Messages in the Message Area Message Description Action !A Wrong Print Cylinder (Drum) Type The type of the Print Cylinder Change the Print Cylinder (Drum) or has been Selected! (Drum) selected on the Main select the correct type on the Main Select Another Print Cylinder (Drum) Display differs from the one Display.

  • Page 192: Troubleshooting Tips

    Tips If any problems occur in printing on your RISO printer, check the related items in this chapter before calling your authorized service representative. Problem Cause Action The unit does not start even when the • Check whether the power cord is power switch is pressed.
  • Page 193 Troubleshooting Tips Problem Cause Action Printed copies are half or three quarter The initial setting of the Multi- Change the initial setting of the Multi- blank in the Multi-Up printing. Up printing feature is adjusted Up printing feature to cancel the to provide an interval for interval time.
  • Page 194 Troubleshooting Tips Problem Cause Action The back of finished copies are The rubber Pressure roller, Remove the Print Cylinder (Drum) and smudged with ink. which keeps printing paper clean the roller gently with a soft cloth pressed against the Print or tissue.
  • Page 195 Troubleshooting Tips Problem Cause Action Decrease the stripper pressure as Cards frequently jam in the Paper Feed shown by the arrow. Area even if the Paper Feed Pressure Adjustment Lever is set to “CARD”. = RP3790 / RP3590 = Besides, change the angle of the stripper plate by turning the dial in the direction shown by the arrow.
  • Page 196 Check if the modem cable is securely connected to the modem connected between the serial port of and/or the public your RISO Printer and the LINE telecommunication line. terminal of the modem. Check if the telecommunication wire is securely connected between the PHONE terminal of the modem and the public telecommunication line socket.

  • Page 197: Appendices

    Appendices ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ This section includes information on options and specifications.

  • Page 198: Optional Accessories

    Accessories A variety of optional accessories are available to enhance the capabilities of your RISO Printer RP series models. Color Cylinder [Drum] Job Separator4 4 4 4 4 A variety of colors are available, such as blue, red, This accessory efficiently sorts groups of prints with green, and brown.

  • Page 199: Specifications - Rp3700

    Sorter TM5000, Special Paper Feed Kit, Document Memory Card DMC-32 and Network Interface Card (pre-installed in the USA model) Power Source RP3700I : 120V AC, 60Hz <5.0A> (Requirements) RP3700W : 220-240V AC, 50/60Hz <2.2A> RP3700N : 110V AC, 60Hz <5.0A>...

  • Page 200: Specifications - Rp3790

    pecifications - RP3790 Processing High-speed automatic digital scanning/fully automatic, thermal screening duplicating system Time to First Copy Letter or A4 original : approx. 17 sec. (Landscape) Print Speed 5 selectable print speeds (60 to 120 sheets/min.) Scanning Resolution 600 x 600dpi Original Input Type Bound documents or sheets Original Size...

  • Page 201: Specifications - Rp3500

    pecifications - RP3500 Processing High-speed automatic digital scanning/fully automatic, thermal screening duplicating system Time to First Copy Letter or A4 original : approx. 10 sec. (Landscape) Print Speed 5 selectable print speeds (60 to 120 sheets/min.) Scanning Resolution 400 x 400dpi Original Input Type Bound documents or sheets Original Size...

  • Page 202: Specifications - Rp3590

    pecifications - RP3590 Processing High-speed automatic digital scanning/fully automatic, thermal screening duplicating system Time to First Copy Letter or A4 original : approx. 10 sec. (Landscape) Print Speed 5 selectable print speeds (60 to 120 sheets/min.) Scanning Resolution 400 x 400dpi Original Input Type Bound documents or sheets Original Size...

  • Page 203: Specifications - Rp3100

    pecifications - RP3100 Processing High-speed automatic digital scanning/fully automatic, thermal screening duplicating system Time to First Copy Letter or A4 original : approx. 14 sec. (Landscape) Print Speed 5 selectable print speeds (60 to 120 sheets/min.) Scanning Resolution 300 x 400dpi Original Input Type Bound documents or sheets Original Size...

  • Page 204: Features

    eatures RP3700 RP3790 RP3500 RP3590 RP3100 Model Feature Metric Metric Metric Metric Metric Direct-Touch-Control Display √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ Dot-Screening √ √ √ √ √...

  • Page 205: Index

    ndex Symbols and Numerals “Enlargement, Standard” ..........59 “Enlargement, Zoom” ........... 59 Key ......12,61,133,135,136,137,145,148 “Envelope, Printing” ........... 152 “Environment, Recommended” ........18 Accessories ..............198 Error Message ............180 Action Area ..............14 “ADF Original Guide, Illustration” ......... 10 “ADF Original Receiving Tray, Illustration”...
  • Page 206 Index Replacing Master Roll ..........167 Next Page ............75, 142 Replacing Paper ............22 “Nonstandard Paper, Registering” ....... 29, 144 Reserved Period ............73 Reset Key ..............13 Rotating Images 180 Degrees ........116 Original Size Sensor ............ 10 “Originals, Size”...

This manual is also suitable for:

Rp3500uiRp3790iRp3700wRp3790wRp3590uiRp3500aw ... Show all

Table of Contents