Setting The Stacking Tray On The Carriage; List Of Settings; Printer Driver Settings - Riso 9630R User Manual

Chapter 8 Optional Equipment
Setting the Stacking Tray
on the Carriage
The stacking tray can be removed from the
carriage. When you have removed the stacking tray
to remove printouts, set the stacking tray on the
carriage and return the high capacity stacker
together with the carriage.
1
Align the end of the stacking tray
with the two screws at the base of
the handle on the carriage.
2
Set the carriage by inserting its
protrusions into the holes in the
stacking tray.
8-22

List of Settings

The items described below can be set when the
high capacity stacker is connected.
Printer Driver
Setting item Use this item to:
[Finishing] tab
Offset Output Stack sets of printed
documents slightly
apart from one another
when printing multiple
copies.
Output Tray Specify the output tray.
Output Tray Switch the output tray
Relay automatically when the
output tray becomes
full.
[Advanced] Tab
Program Specify the number of
copies by group (such
as corporate division or
class).
Offset Stack sets of printed
Output documents slightly
(Program) apart from one another
to create separation.
• When [Offset Output] and [Output Tray] are
grayed out on the [Finishing] tab, make sure
that [Printer Configuration] on the [Environment]
tab has been configured correctly. (p. 3-32
"Printer Configuration")
ComColor GD Series User's Guide
See
p. 8-23
p. 8-23
p. 8-24
p. 3-28
p. 8-24