Riso 9630R User Manual page 203

■ Separating Books
Printouts are output upon being separated per booklet
based on a certain number of pages per volume. The
assignment of pages will differ depending on the settings.
[OFF]
The pages will be assigned so that the pages are in order
when the booklet is bound in the center. When the data
contains a large number of pages, the booklets will be
output as multiple volumes. The pages will be assigned
so that when these volumes are opened and stacked on
top of each other, they can be bound to form a single
booklet.
[ON]
The pages will be assigned so that when all volumes that
are output are stacked in their folded state, the pages will
be in the correct order. The volumes will be output per 5
sheets when [Booklet Binding] is set to [Fold] while they
will be output per 15 sheets when this is set to [Fold +
Staple].
• In the factory default state, multiple volumes will
be output when the number of pages exceeds 5
sheets when [Booklet Binding] is set to [Fold] or
15 sheets when this is set to [Fold + Staple].
• The staples will not be inserted when multiple
volumes are being output.
• When [Separating Books] is set to [ON],
[Booklet Cover] and [Add Cover] cannot be
used.
Example: 60 pages, set to [Fold], separating books [OFF]
p. 21 to 30 + p. 31 to 40
c
p. 11 to 20 + p. 41 to 50
b
p. 1 to 10 + p. 51 to 60
a
Example: 60 pages, set to [Fold], separating books [ON]
■ Center Margin
Enter a value for [Width].
Select the [Auto Reduction] check box to automatically
reduce the printed image to fit the paper in cases where
the margin width does not allow for the original-scale
printed image to fit into the paper.
■ Booklet Cover
Print only the cover page (the first two pages and the last
two pages of the original) separately. This setting is
convenient for printing the cover and body using different
types of paper.
[OFF]
Cover separated printing is not configured.
[Print Cover Only]
The cover page only is printed.
[Print Except Cover]
The pages other than the cover are printed as a booklet.
[Store Except Cover to Waiting List]
When printing the body pages after printing the cover,
place a check in [Store Except Cover to Waiting List] to
instruct printing from the operation panel on the machine.
In this case, specify the feed tray that is loaded with
cover paper.
a b c
[Cover Sheet Tray]
p. 41 to 60
c
b p. 21 to 40
a p. 1 to 20
[Standard Tray], [Feed Tray 1], [Feed Tray 2],
[Feed Tray 3]
ComColor GD Series User's Guide
Multifunction Finisher
c
b
a
8-33
8