Favorites] Tab - Riso 9630R User Manual

Chapter 8 Optional Equipment
• Use commas to separate the specified page
numbers (1,2,3, etc.), or specify a range of pages
(such as 1-10).
• If no tray is specified for a particular page, it is
printed from the tray specified in the [Paper
Tray] setting.
• When a tray is specified for a page, image
processing is performed on the page based on
the paper settings (paper type) for the specified
tray.
■ Setting Example
Specifying a tray for each page when printing a 15-page
document
Tray to use
Standard tray or high
capacity feeder
Feed tray 1
Feed tray 2
Feed tray 3
Pages 1 and 5 are printed from the standard tray or high
capacity feeder, pages 6 through 10 are printed from
feed tray 1, and pages 11, 13, and 15 are printed from
feed tray 2, page 12 is printed from feed tray 3, and
pages 2 through 4 and 14, none of which have a
specified tray, are printed from the tray specified in the
[Paper Tray] setting.
• [Tray Selection Per Page] cannot be used
together with [Mixed Size Original], [Combine],
[Image Repeat], [Booklet], [Image Rotation],
[Add Cover], or [Multi-part Paper Printing].
(p. 3-11 "Mixed Size Original", p. 3-15
"Combine", p. 3-16 "Image Repeat", p. 3-16
"Booklet", p. 3-20 "Rotation", p. 3-23 "Add
Cover", p. 3-30 "Multi-part Paper Printing")
• If you are using the optional face down finisher
or high capacity stacker, [Tray Selection Per
Page] cannot be used together with [Offset
Output]. (p. 8-6 "Offset Output", p. 8-23 "Offset
Output")
• If you are using the optional face down finisher,
[Tray Selection Per Page] cannot be used
together with [Fold], [Booklet Binding], or [Offset
Output]. (p. 8-30 "Fold", p. 8-32 "Booklet
Binding", p. 8-34 "Offset Output")
8-46
Setting values
1, 5
6 - 10
11, 13, 15
12

[Favorites] Tab

For more information on each setting item, see
"[Favorites] Tab" (p. 3-14) in "Printing".
[Layout] Tab
For more information on each setting item, see
"[Layout] Tab" (p. 3-15) in "Printing".
• The [Watermark] setting is not available with the
PostScript printer driver.
Image Shift
Adjust the printing position of images.
• You can adjust the printing position a maximum
of ±254 mm (10") up, down, left, or right, in
increments of 0.1 mm (0.004").
• When performing duplex printing, the front and
back sides can be adjusted separately.
Select the [Image Shift] check box and click [Details] to
display the [Image Shift] dialog box. Enter a value in the
box for the direction that you want to adjust.
[Front Side], [Back Side]
Enter a value for [Horizontal] or [Vertical].
[Reset]
Resets the entered value to 0 on the front or back side
separately.
Preview
You can preview the adjusted image position on the front
or back side separately.
ComColor GD Series User's Guide