Entering Text - Riso 9630R User Manual

Buttons that are not available under the current
conditions are grayed out. You can use these
buttons when the required conditions are met.
This option is available
because [Front Cover]
is set to [ON].
Confirming / Canceling a
Setting
When [OK] is displayed on a screen, you must
touch [OK] to save the settings. If you do not touch
[OK], the settings may be canceled.
To cancel the settings you have edited, touch
[Cancel].
Colors of Setting Buttons
When a setting is changed, the setting button turns
color to indicate that the setting has been changed
from the default value.
28
This option is not
available because [Back
Cover] is set to [OFF].

Entering Text

When entering user names or passwords, enter the
required information on the text input screen.
1
Touch the characters you want to
enter one by one.
To move the cursor, touch [
if you need to erase a character to the left of the
cursor.
• If the available characters are restricted, as
is the case with passwords, the characters
that cannot be used are grayed out.
• To enter an upper case letter, touch [Shift]
first, and enter the character. To return to
the lower case letter input, touch [Shift]
again.
• The maximum number of characters that
can be entered and the current number of
characters entered are displayed to the
right of the text input field.
2
After entering the text, touch [OK].
• Depending on the entry area, touching the area
may not open up an entry screen. In such
cases, use the numeric keys.
• The current selected area is indicated by a
flashing short line under numbers or letters. To
switch the area, touch the area that you want to
enter text in.
ComColor GD Series User's Guide
] or [ ]. Touch [ ]