Riso 9630R User Manual page 207

Offset Output ([Separation])
In addition to the "Separation" (p. 1-27) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
• You cannot use [Offset Output] and [Mixed Size
Original] at the same time. (p. 1-13 "Mixed Size
Original")
[OFF]
Offset output is not performed.
[Between Sorts]
Each sorted set is stacked slightly apart from one
another.
[After a Job]
Each print job is stacked slightly apart from one another.
Paper sizes that can be offset
• A3, B4, A4, A4-LEF, B5-LEF, Ledger, Legal,
Letter, Letter-LEF, Foolscap, Specified Size
(203 mm × 182 mm - 297 mm × 488 mm
(8" × 7 3/16" - 11 11/16" × 19 3/16"))
1
Touch [Separation].
2
Select the offset output setting.
3
Touch [OK].
Staple/Punch
Staple or punch holes at the specified position.
• [Staple/Punch] cannot be used together with
[Booklet] and [Page Border]. (p. 1-16 "Booklet",
p. 1-19 "Page Border")
• The [Staple] and [Output Tray Relay] functions
cannot be used at the same time. (p. 8-41
"Output Tray Relay")
Types of paper that can be stapled
• Paper size: A3, B4, A4, A4-LEF, B5-LEF,
Ledger, Legal, Letter, Letter-LEF, Foolscap,
Custom size
203 mm -
297 mm
(8" -
11 11/16")
182 mm - 432 mm
(7 3/16" - 17")
2
• Paper weight: 52 g/m - 210 g/m
(14-lb bond - 56-lb bond)
When the paper weight exceeds 162 g/m
(43-lb bond), only one sheet can be stapled for
the cover.
ComColor GD Series User's Guide
Multifunction Finisher
Paper feed
and output
direction
2
2
8-37
8