Reverse Order - Riso 9630R User Manual

Chapter 8 Optional Equipment
■ Print Face
When [Alternating Overlay (Long Edge)]/[Alternating
Overlay (Short Edge)] or [Each Page + Alternating
Overlay (Long Edge)]/[Each Page + Alternating Overlay
(Short Edge)] is selected in [Print Pattern], specify
whether to print the form data on the front or back side of
the paper.
Output data
When [Front] is selected for [Print Face]
Front
When [Back] is selected for [Print Face]
Front
• When [Each Page + Alternating Overlay (Long
Edge)]/[Each Page + Alternating Overlay (Short
Edge)] is selected, specify the side on which to
print only the form.
8-52
Form 1
Back
Back
■ Preferred Layer
When [Each Page Overlay], [Each Page + Alternating
Overlay (Long Edge)], or [Each Page + Alternating
Overlay (Short Edge)] is selected for [Print Pattern],
specify whether to assign priority to the form data or the
output data, and overlay it on the other.
[None]
The output data and the form data are overlaid.
[Document]
Priority is given to the output data (original) layer, and it is
overlaid on top of the form data.
[Form]
Priority is given to the form data layer, and it is overlaid
on top of the output data.
• If the image size of the priority layer is larger
than that of the non-priority layer, the image of
the non-priority layer may not be printed.
• If the output data and the form data overlap on
the portions having the same color, it might be
difficult to distinguish the image of the
assimilated portions.

Reverse Order

When the check box is selected, printouts are
printed in reverse order.
• [Reverse Order] cannot be used together with
[Booklet] or [Booklet Binding]. (p. 3-16
"Booklet", p. 8-32 "Booklet Binding")
ComColor GD Series User's Guide