Riso 9630R User Manual page 205

Output Tray
Specify the output tray for printouts.
When [Auto] is specified, printouts are output to the
appropriate tray automatically based on the
configured functions. To output printouts to the
multifunction finisher, select [Top Tray] / [Stacking
Tray].
Click [Details] to display the [Output Tray] dialog box.
Specify whether to stack the pages face up or face down
in the stacker.
[Face Up], [Face Down]
• When [Offset Output], [Staple], [Punch], [Fold],
or [Booklet Binding] is configured, the output
trays that can be selected with [Output Tray] will
differ depending on the configured details.
(p. 8-34 "Offset Output", p. 8-28 "Staple",
p. 8-30 "Punch", p. 8-30 "Fold", p. 8-32 "Booklet
Binding")
Output Tray Relay
The output tray switches automatically when the
tray is full.
• When [Output Tray Relay] is configured, [Sort]
is set to [Uncollated]. (p. 3-10 "Sort")
• [Output Tray Relay] cannot be used together
with [Add Cover], [Staple], [Bi-fold], [Inner Tri-
fold], and [Outer Tri-fold] of [Fold], or [Booklet
Binding]. (p. 3-23 "Add Cover", p. 8-28 "Staple",
p. 8-30 "Fold", p. 8-32 "Booklet Binding")
Offset Output (Program)
In addition to the "Program" (p. 3-28) function for
printouts, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly apart
from one another.
[Between Groups]
Groups of printed documents are stacked slightly apart
from one another.
Copy Mode Settings
Binding ([Booklet])
In addition to the "Booklet" (p. 1-16) function for
copying, you can configure the fold and staple
when finishing printouts in the form of a booklet.
• When [Binding] is configured, [Sort] is set to
[Collated]. (p. 1-11 "Sort")
• [Binding] cannot be used together with
[Program], [Sort], [Output Tray], [Face Up/
Down], or [Output Tray Relay]. (p. 1-24
"Program", p. 1-27 "Separation", p. 8-41
"Output Tray", p. 8-41 "Face Up/Down", p. 8-41
"Output Tray Relay")
[OFF]
Binding will not be configured.
[Fold + Staple]
The paper is folded in half and stapled (bound in the
center).
[Fold]
The paper will be folded in two.
ComColor GD Series User's Guide
Multifunction Finisher
8-35
8