Riso 9630R User Manual page 79

●
3 Specify an address or
destination.
If you select [Mail] or [PC], specify the address/
destination for the scanned data.
• If you select [Console], you do not need to
specify the destination. The scanned data is
saved to the internal hard disk of this machine.
■ When you have selected [Mail]
You can attach the scanned data to e-mail messages
and send them.
1
Touch [Address].
The [Address] screen is displayed.
2
Select an address from [Mail
Address Book].
Index
The selected address appears in [Selected].
• You can touch the index to narrow down the
list of addresses registered in the address
book.
Overview of Scan Operations
3
Touch [OK].
• To send to an address that is not displayed
in [Mail Address Book], touch [Direct Input]
to register a new address.
• To remove an address from [Selected], you
can either clear all addresses by touching
[Clear All] or select the address to remove
and touch [Clear].
• Touch [Sender] to display the [Sender]
screen and enter the sender's name.
■ When you have selected [PC]
The scanned data is saved on a computer on the
network.
1
Touch [Destination].
The [Destination] screen is displayed.
2
Select a destination from [PC
Address Book].
Index
The selected destination appears in [Selected].
• You can touch the index to narrow down the
list of destinations registered in the address
book.
ComColor GD Series User's Guide
2
2-3