Riso 9630R User Manual page 208

Chapter 8 Optional Equipment
Number of sheets that can be stapled
• When using standard size paper
A4, A4-LEF, B5-LEF (Letter, Letter-LEF):
2 to 100 sheets
Sizes other than the above (A3, B4 (Ledger,
Legal)): 2 to 65 sheets
• When using custom size paper
When the paper is longer than 297 mm
(11 11/16"): 2 to 65 sheets
When the paper is both wider and longer than
216 mm (8 1/2"): 2 to 65 sheets
Custom size paper other than the above: 2 to
100 sheets
297 mm (11 11/16")
• When a job exceeding the maximum number of
sheets that can be stapled is printed, the
printouts will be output without being stapled.
Types of Paper that can be punched
• Paper size:
2 holes: A3, B4, A4, A4-LEF, B5-LEF, Ledger,
Legal, Letter, Letter-LEF
3 holes: A3, B4, A4-LEF, B5-LEF, Ledger,
Letter-LEF
4 holes: A3, A4-LEF, Ledger, Letter-LEF
• Paper weight: 52 g/m
(14-lb bond - 53-lb bond)
8-38
Paper feed
and output
direction
2 2
- 200 g/m
■ Original Orientation
[Top Side Up]
Select this option when loading originals in an orientation
from which they can be read normally.
[Top Side Left]
Select this option when loading originals so that the top
of the original is aligned with the left edge.
■ Binding Edge
Select the binding edge of the paper.
Left, Right, Top
■ Staple
Select the stapling position.
If you select the left or the right for [Binding Edge], select
from the following options:
[OFF], 1 staple, 2 staples
If you select the top for [Binding Edge], select from the
following options:
[OFF], left 1 staple, right 1 staple, 2 staples
• The left 1 staple and the right 1 staple are
displayed only when the top is selected for
[Binding Edge].
1
Touch [Staple/Punch].
2
Configure [Binding Edge].
3
Configure [Staple].
4
Touch [OK].
ComColor GD Series User's Guide