Sample Copy; Check Setting - Riso 9630R User Manual

Chapter 1 Copying

Sample Copy

The printing stops after one copy has been printed.
This function allows you to check the output before
making a large number of printouts.
• If you set [Sort] to [Collated], you can use this
function to make one copy as a sample. (p. 1-11
"Sort")
1
Touch [Sample Copy].
The [Sample Copy] screen is displayed.
2
Touch [ON].
3
Touch [OK].
4
Press the [Start] key.
The [Making sample copies] screen is displayed,
and copying of the original starts. The current status
is displayed on the screen.
• The copying can be paused with the [Stop] key.
(p. 1-3 "Canceling Copying")
• Touch [Slow Printing] to slow down the printing
speed. This also reduces the amount of noise
produced by the machine when printing jobs.
The [Confirm] screen appears after a sample copy is
printed.
You can change the following settings:
• [Change Setting] (p. 1-4 "Changing Settings during
Copying")
• [Maintenance] (p. 1-4 "Performing Maintenance
During Copying")
1-32

Check Setting

Use this option to check the current settings.
1
Touch [Check Setting].
The [Check Setting] screen is displayed. Check the
current settings.
The following settings can be configured from the
sub menu:
• Add to Favorites
• Save as Default
• Setting Confirmation Print
2
Touch [Back].
ComColor GD Series User's Guide