Copy Mode Settings - Riso 9630R User Manual

Chapter 8 Optional Equipment
Offset Output
Stack sets of printed documents slightly apart from
one another when printing multiple copies.
• When [Program] is configured, [Offset Output] is
[OFF]. (p. 3-28 "Program")
• This setting is not available for paper sizes that
cannot be output to the face down finisher.
• When using the face down finisher, you cannot
use this setting with stapling.
• When [Mixed Size Original] is configured,
[Offset Output] is [OFF]. (p. 3-11 "Mixed Size
Original")
[OFF]
Offset output is not performed.
[Between Sorts]
Sets of printed documents specified in [Sort] are stacked
slightly apart from one another.
[Between Jobs]
Finished print jobs are stacked slightly apart from one
another.
Offset Output (Program)
In addition to the "Program" (p. 3-28) function for
printouts, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Sets of printed documents are stacked slightly apart from
one another.
[Between Groups]
Groups of printed documents are stacked slightly apart
from one another.
8-6

Copy Mode Settings

Offset Output ([Program])
In addition to the "Program" (p. 1-24) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly apart
from one another.
[Between Groups]
Groups of printed documents are stacked slightly apart
from one another.
Offset Output ([Separation])
In addition to the "Separation" (p. 1-27) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
• You cannot use [Offset Output] and [Mixed Size
Original] at the same time. (p. 1-13 "Mixed Size
Original")
[OFF]
Offset output is not performed.
[Between Sorts]
Each sorted set is stacked slightly apart from one
another.
[After a Job]
Each print job is stacked slightly apart from one another.
Paper that can be offset
• When using the face down finisher:
131 mm × 148 mm - 305 mm × 550 mm
(5 3/16" × 5 27/32" - 12" × 21 5/8")
1
Touch [Separation].
2
Select the offset output setting.
3
Touch [OK].
ComColor GD Series User's Guide