Operating Environment - Riso 9630R User Manual

PS Kit
When the PS kit is installed, it becomes possible to
print combinations of variable data such as forms
and databases for slips, and also print DTP data
using PostScript fonts.
This section describes basic printer driver
operations, as well as how to use various functions.
• Log in as a user with administrator privilege
(Windows), or as a root user (OS X or Linux).
• Close all active applications.

Operating Environment

The system requirements for activating the
PostScript 3 printer driver are described in the table
below.
Memory 1 GB or more
Windows or Linux: Intel or fully
CPU compatible CPU
OS X: Intel CPU
2 GB or more free space
Hard disk
(Sufficient to operate the OS)
Display 1024 × 768 or greater resolution
8-42
Installing to Windows
1
Load the included DVD-ROM in the
computer's DVD-ROM drive.
The installation wizard automatically starts up. If the
installation wizard does not start up, double-click the
"Install.exe" file on the DVD-ROM.
2
Select the desired language in the
pull-down menu and click [OK].
3
Follow the on-screen instructions to
configure the settings.
4
Click [Finish].
If the printer driver is installed over the existing one,
the computer restarts.
• If you do not want to restart the computer
now, remove the check mark from the
[Restart now] check box before clicking
[Finish].
5
Remove the DVD-ROM from the
computer.
• Keep the DVD-ROM in a safe place for
future reference.
Uninstalling From OS X
Use the uninstaller to uninstall the printer driver
compatible with PostScript 3.
Uninstall the printer driver in the same way as
described in "Uninstalling the Printer Driver" in the
"Administrator's Guide".
ComColor GD Series User's Guide