Riso 9630R User Manual page 15

J Main Power Switch
Use this switch to turn on the power. Usually the power is
left ON.
K Main Unit Socket
Connect the main unit power cable to this socket.
L Paper Feed Guide Levers
Use these levers to slide or fix the standard tray paper
guide. Levers are located on both sides of the standard
tray paper guide, in two places.
M Left Cover
Open this cover when there is a paper jam.
N USB Port
Connect a USB flash drive to this port to save the
scanned data or to print the data saved on a USB flash
drive.
• Use USB flash drives compatible with Mass
Storage Class and USB 2.0 or 3.0
specifications.
O Operation Panel
Use to perform operations or settings.
You can adjust the angle so that it is easier to see.
P ADF Original Unit Lever
Pull this lever up to open the ADF original unit cover
when documents are jammed.
Q Auto Document Feeder (ADF)
Up to about 200 documents can be automatically fed.
R ADF Original Guide
Slide to fit the width of the document.
S ADF Original Output Tray
Documents that are read from the ADF are output here.
T Front Cover
Normally the front cover is locked and cannot be opened.
This lock is automatically released when a paper jam or
other problems occur.
To open the front cover in other cases, go to
[Maintenance] from the [Home1] screen and touch [Front
Cover Release].
U Feed Tray 1, Feed Tray 2, Feed Tray 3 (Feed
Trays)
Load the paper to be used for printing here.
• Use the standard tray for thick paper and other
special paper types.
V Paper Alignment Lever
Use this lever to align the documents that are output. If
the lever interferes with output, pull it up and lock it.
ComColor GD Series User's Guide
Part Names and Functions
13