Paper Tray Relay; Auto Image Rotation; Interrupt Copy - Riso 9630R User Manual

Chapter 1 Copying

Paper Tray Relay

Use this option to automatically feed paper from a
different tray with the same paper size and paper
type when the selected tray runs out of paper.
[OFF], [ON]
1
Touch [Paper Tray Relay].
The [Paper Tray Relay] screen is displayed.
2
Touch [ON].
3
Touch [OK].

Auto Image Rotation

This rotates the image 90 degrees automatically
when the orientations of the original and paper do
not match, even if the paper size loaded in the tray
matches the size of the loaded original. Normally,
this setting is set to [ON].
1-30

Interrupt Copy

This function allows you to pause the job being
printed to copy another document.
• The following functions are not available for
interrupt copy:
[Program], [Slip Sheet], [Add Cover], [ADF Scan
& Pause]
• When performing an interrupt copy with a job
being output to the multifunction finisher, the
following settings are unavailable:
[Staple/Punch], [Fold], [Binding],
[Separating Books], [Output Tray], [Face Up/
Down], [Output Tray Relay]
• An interrupt copy cannot be made while a job
using the staple function or offset output
function is being processed with the face down
finisher. The interrupt copy function is available
when any one of the optional stacking tray, high
capacity stacker, or multifunction finisher is
connected.
1
Press the [Interrupt] key.
The interruption screen is displayed.
2
Load the original and press the
[Start] key.
• You can continue with the interrupt copy operation
while the [Ready to copy. (Interrupting)] message
is displayed.
3
After copying is completed, press
the [Interrupt] key to cancel interrupt
copy.
Printing of the paused job resumes.
• Interrupt copy is also canceled when the machine
has not been operated for 60 seconds.
ComColor GD Series User's Guide