Stacking Tray (Auto-Control Stacking Tray / Wide Stacking Tray); Loading The Stacking Tray - Riso 9630R User Manual

Stacking Tray (Auto-control Stacking Tray / Wide Stacking Tray)

The auto-control stacking tray and wide stacking
tray are available as optional stacking trays.
• With the auto-control stacking tray, the paper guides
adjust automatically to fit the paper size.
• With the wide stacking tray, move the paper guides
(side and end) to match the paper size.
The auto-control stacking tray is shown in the
illustrations below.
A Paper Arrangers
Set to suit the paper type so that the output paper is
neatly aligned.
B Paper Guide (side)
C Paper Guide (end)
Use to prevent output paper in the stacking tray from
becoming misaligned.
D Paper Guides Open Button
(Auto-control stacking tray only)
Use to spread the paper guides apart. Operation varies
depending on whether paper is present or not.
• When the machine is idle and there is no paper in the
stacking tray, the guides open to the loading position.
• When the machine is idle and there is paper in the
stacking tray, the paper guides spread apart, making it
easy to remove the paper. The administrator can
configure which paper guides spread apart when the
button is pressed.
Loading the Stacking
Tray
Follow the procedure below to load the stacking
tray. Depending on the paper size or type, you can
also adjust the paper arranger at this time.
• The auto-control stacking tray is shown in the
illustrations below.
• When using the wide stacking tray, manually
adjust the positions of the paper guides (side
and end) to match the paper size.
1
Open the stacking tray in the
direction of the arrow until it stops.
2
Lift the paper guides (side) to stand
them upright.
ComColor GD Series User's Guide
8
8-13