Load Paper - Riso MZ790U Instruction Manual

3

Load paper.

See "p.31 for details on how to load the paper.
4
Set up the Paper Receiving Tray.
See "p.33 for details on how to set up the Paper
Receiving Tray.
5
Place the original for Cylinder
(Drum) 1.
Place the original on the Stage Glass or in the
optional ADF (Auto Document Feeder) unit.
When placing on the Stage Glass
!
Place the original face down on Stage Glass.
Align center on the top edge, and close Stage
Cover.
Magazines, books, scrap books, etc. should be
placed on Stage Glass.
Tip:
Using the Gauge Cover
The Gauge Cover allows you to align original
images precisely on the Stage Glass even if
they are not squared on the sheet. Shift the
original sheet along the grid lines printed on the
cover, touching it through the openings on the
cover.
Gauge Cover
Place the original
face-down
When placing in the ADF unit
!
(Option)
Use the ADF unit if you are printing multiple
originals in succession. Place originals face-
down and then adjust the ADF Original Guides
to the width of the originals. Insert the originals
as far into the ADF unit as possible.
If you are using the ADF unit, both originals for
Cylinder (Drum) 1 and Cylinder (Drum) 2 can
be set together. If you choose to do so, place
the original for Cylinder (Drum) 1 on top and
the original for Cylinder (Drum) 2 on the bot-
tom.
Note:
• If you are placing the originals one at a time,
for the procedures below, place them in the
same way you would when placing on the
stage glass. If two originals are placed at
once, the procedures differ, since masters
are consecutively made from Cylinder
(Drum) 1 and Cylinder (Drum) 2.
2-Color Printing with 2 Originals
Basic Operations
Grasp here
and lift up the
gauge cover
39