Emergency Stop Reset - Yamaha RCX40 User Manual

6. Emergency stop
n
NOTE
• Emergency stop can also be
triggered by an emergency stop
input from the SAFETY I/O
interface. To cancel this
emergency stop, refer to Chapter
6.
• Origin positions are retained even
when emergency stop is triggered,
so the robot can be operated the
same as before emergency stop
just by canceling emergency stop
without absolute reset.
4
16
4-
6.1

Emergency stop reset

To return to normal operation after emergency stop, emergency stop must be reset.
1) Cancel the emergency stop button on the MPB.
Emergency stop is released by turning the emergency stop button clockwise.
2) Press the key while holding down the
LOWER
The screen switches to "UTILITY" mode and the message "Cancel emergency
flag?" appears.
Fig. 4-6-2 Emergency stop reset (1)
Cancel emergency flag?
3) Press the (YES) key.
F 4
The following screen appears.
Fig. 4-6-3 Emergency stop reset (2)
UTILITY
Date,Time
MOTOR power: Off
Sequence
Armtype
MOTOR SEQUENC ARMTYPE
At this time, pressing the
power still turned off. To turn on the motor power, continue the following operations.
4) Press the (MOTOR) key.
F 1
The following screen appears.
Fig. 4-6-4 "UTILITY>MOTOR" mode (1)
UTILITY>MOTOR
Motor power: Off
D1=M1: Brake
D2=M2: Brake
D3=M3: Brake
D4=M4: Brake
ON OFF
key.
UTILITY
YES
: 01/02/20,18:59:37
: DISABLE
: RIGHTY
key returns to the previous mode with the motor
ESC
D5=M5: no axis
D6=M6: no axis
NO
(32°C)
RST.DO