Other Parameters - Yamaha RCX40 User Manual

12. "SYSTEM" mode
4
n
NOTE
This parameter does not change even
if initialized.
168
4-
12.1.3

Other parameters

When changing other parameters on the MPB, follow the descriptions in this section.
Fig. 4-12-30 Editing other parameters
SYSTEM>PARAM>OTHER
1.Display language(JPN/ENG)
2.Data display length
3.Parameter display unit
4.DO cond. on EMG
5.Watch on STD.DO DC24V
EDIT JUMP
Valid keys and submenu descriptions for editing other parameters are shown below.
Valid keys Menu
Cursor key
Moves the cursor up and down.
(↑/↓)
Page key
Switches to other screens.
( / )
F1 EDIT Edits the parameter.
JUMP
F2 Moves the cursor to the designated parameter.
1. Display characters
This parameter sets the language for displaying messages on the MPB.
[Procedure]
1) Select "1. Display language (JPN/ENG)" in "SYSTEM>PARAM>OTHERS" mode.
2) Press the (EDIT) key.
F 1
The function key menu changes.
Fig. 4-12-31 Setting the display characters
SYSTEM>PARAM>OTHER
1.Display language(JPN/ENG)
2.Data display length
3.Parameter display unit
4.DO cond. on EMG
5.Watch on STD.DO DC24V
JAPANES ENGLISH
3) Press the key (JAPANES) or
F 1
display.
4) Press the key to quit the edit mode.
ESC
V8.01
ENGLISH
6char
PULSE
HOLD
VALID
Function
V8.01
ENGLISH
6char
PULSE
HOLD
VALID
key (ENGLISH) to set the language to
F 2