Memory Card Errors - Yamaha RCX40 User Manual

14.22 : No start code (@)
Code
Meaning/Cause : Starting code "@" was not added at beginning of single line in
Action
14.23 : Illegal command,Operating
Code
Meaning/Cause : During data editing, an on-line command was executed.
Action
14.24 : Illegal command,Running
Code
Meaning/Cause : During program run, a non-executable on-line command was
Action
14.25 : Illegal command in this mode
Code
Meaning/Cause : Cannot execute the specified online command in the current
Action
14.26 : Illegal command,SERVICE mode
Code
Meaning/Cause : Unable to execute since operation is in SERVICE mode.
Action
14.31 : Illegal port type
Code
Meaning/Cause : Communication port not specified.
Action

[15] Memory card errors

15.1 : Invalid file attribute
Code
Meaning/Cause : a. Directory was accessed.
Action
: &H0E16
an on-line command.
: Add starting code "@" at the beginning of on-line command.
: &H0E17
: After completing data edit, execute an on-line command.
: &H0E18
attempted.
: After stopping the program, execute the on-line system com-
mand which could not previously be executed.
: &H0E19
mode.
: 1. Stop the online command.
2. Change the mode.
: &H0E1A
: 1. Cancel SERVICE mode.
2. Change the exclusive control settings so it can be used in
SERVICE mode.
: &H0E1F
: Contact our company with details on this problem.
: &H0F01
b. Read/write protected file was accessed.
: 1. Change to a file which can be accessed.
2. Change to a file allowing read/write.
1. Error Messages
31
9-
9