Initializing The Memory - Yamaha RCX40 User Manual

12. "SYSTEM" mode
n
NOTE
• External data must be input to
restore the memory after it has
been initialized.
• The memory must be initialized if
4
damaged due to some kind of
problem.
200
4-
12.4.2

Initializing the memory

This initializes the program, point data, shift coordinates, hand definitions and pallet
definitions.
Before initializing, make sure that the currently input data is no longer needed.
[Procedure]
1) Press the (MEMORY) key in "SYSTEM>INIT" mode.
F 2
Fig. 4-12-78 Initializing the memory
SYSTEM>INIT>MEMORY
Source(use/sum)
Object(use/sum)
Sequence(use/sum)=
Number of program =
Number of points =
PROGRAM POINT
2) Select the item to initialize with the
keys.
A check message appears on the guideline.
Fig. 4-12-79 Initializing the memory (program)
SYSTEM>INIT>MEMORY>PROGRAM
Source(use/sum)
Object(use/sum)
Sequence(use/sum)=
Number of program =
Number of points =
Initialize OK?
3) Press the (YES) key to initialize the memory.
F 4
If not initializing, press the
V8.01
= 1316/196608 bytes
= 528/ 98304 bytes
0/ 4096 bytes
5
124
SHIFT HAND
(PROGRAM) to
F 1
V8.01
= 1316/196608 bytes
= 528/ 98304 bytes
0/ 4096 bytes
5
124
YES
(NO) key.
F 5
ALL
(COMMENT)
F 7
NO