Table of Contents
Advertisement
6.1
Connection to a PC
The connection of the RadEye to a PC requires an adapter
cable.
Adapter cable Order No. 42540/29 is used to connect to a
RS232 port of a PC.
Adapter cable Order No. 42540/26 is used to connect to an
USB port. Using the USB port requires installation of driver
software first.
Using the hardware provided and without exerting too much
force, attach the connections of the adapter cable to the PC and
to the RadEye desktop holder.
The following steps will show how to install the USB-driver
under Windows XP.
Power on your computer and boot to Windows.
Run the driver setup program "RadEye-USB.exe". Click Next
to continue and start the installation.
6-2
DB-059-060324 E
SENTINEL RadEye G
Iw/Pi/Ff 30.07.2008
Advertisement
Table of Contents
