Powering Off A Board; Powering On A Board - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
No.
1
2

4.3.2 Powering Off a Board

Before removing a running board, power off the board.
Context
Before removing a running board, power off the board. For the procedure for removing a board,
see the Quidway S9300 Terabit Routing Switch Quick Installation Guide.
Run the following command in any view of the S9300.
Procedure
Step 1 Run:
power off slot slot-id
The board is powered off.
----End

4.3.3 Powering On a Board

When the power status of a board is PowerOff, you need to power on the board. Then you can
run the board.
Context
Do as follows in any view of the S9300:
Procedure
Step 1 Run:
power on slot slot-id
The board is powered on.
----End
Issue 03 (2011-12-29)
Data
Slot number of the board to be powered off
Slot number of the board to be powered on
CAUTION
NOTE
This command is invalid for the master main control board and slave main control board.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Management
40