Huawei Quidway S9300 Configuration Manual page 167

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Step 3 (Optional) Run:
issu abort
ISSU is aborted.
l If you need to abort ISSU, follow this step instead of Step
l If you need to continue ISSU, skip this step and follow Step
For interactive information and description during ISSU check, refer to
Table 10-3 Description of the issu abort command output
Interactive information
Warning: The ISSU upgrade will be
aborted, and the system will roll back
to old version. Continue? [Y/N]:
Warning: The ISSU will be aborted,
the system will be rolled back to the
old version, and the new AMB will
be rebooted. This operation will take
10 minutes. Continue? [Y/N]:
Step 4 Run:
issu switchover [ force ]
The planes are switched.
Step 5 Run:
issu confirm
ISSU is confirmed.
Issue 03 (2011-12-29)
NOTE
During the ISSU plane switch, the Telnet connection may be terminated. This indicates a normal situation
and you need to wait for 30 seconds. After 30 seconds, you can press Enter to re-log in to the device that
performs ISSU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 4
Description
Warning: The ISSU will be aborted, and the system
will roll back to the old version. Continue? [Y/N]
l If you enter y, the ISSU is aborted, and the system
will roll back to the old version.
l If you enter n, the system aborts the running of the
issu abort command and continues ISSU.
Warning: The ISSU upgrade will be aborted, the
system will roll back to the old version, and the new
AMB will be reset on the basis of the old version. The
process lasts 10 minutes. Continue? [Y/N]
l If you enter y, the ISSU upgrade is aborted, the
system will roll back to the old version, and the new
AMB will be reset on the basis of the old version.
l If you enter n, the system aborts the running of the
issu abort command and continues ISSU.
10 ISSU Configuration
and Step Step 5.
Step 4.
Table 10-3.
155