Huawei Quidway S9300 Configuration Manual page 34

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
[SwitchA] css enable
Reboot needed to change CSS config. Are you sure this operation and reboot now?
[Y/N]y
Step 2 Set the frame ID of SwitchB to 2 and enable the CSS function on SwitchB.
# Set the frame ID to 2.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] set css id 2
Info: CSS config has been changed, need reboot to take effect.
# Enable the CSS function.
[SwitchB] css enable
Reboot needed to change CSS config. Are you sure this operation and reboot now?
[Y/N]y
Step 3 Verify the configuration.
# Check the CSS status of the switch with frame ID 1.
<SwitchA> dis css status frame 1
Property Item
Frame ID
Priority
Enable switch
CSS master force
CSS status
# Check the CSS status of the switch with frame ID 2.
<SwitchA> dis css status frame 2
Property Item
Frame ID
Priority
Enable switch
CSS master force
CSS status
----End
Configuration Files
None.
Issue 03 (2011-12-29)
Property Value
1
255
On
Off
master
Property Value
2
1
On
Off
backup
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 CSS Configuration
22