Process Of Booting The System Software - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Press Ctrl+B within 3 seconds. The S9300 prompts you to enter a password for entering the
Bootload menu. The terminal displays the following message:
password:
If you enter a correct password, you can enter the Bootload menu. The default password is
9300. The Bootload menu is as follows:
Enter your choice(1-8):
Through the Bootload menu, you can upgrade the system software or specify the system software
to be loaded for starting the S9300.
The extended BootROM software initializes the serial port and the console port, and
decompresses and boots the system software. The terminal displays the following message:
Auto-booting...
Booting from CFCard...
Loading............................................................Done!
Uncompressing...Done!
Now, the BootROM software booting is complete, and the S9300 starts to load the system
software.

9.3 Process of Booting the System Software

The section describes the process of booting the system software.
The S9300 system software provides basic features. The process of booting the system software
is as follows:
1.
2.
3.
4.
5.
Issue 03 (2011-12-29)
****************************************************
*
* S9300 Bootrom, Ver 102
*
****************************************************
Copyright(C) 2008-2026 by HUAWEI TECHNOLOGIES CO., LTD.
Creation date: Feb 25 2009, 14:54:14
PCB Version : LE02SRUA VER.B
CPU type : Cavium Octeon
CPU L2 Cache : 128KB
CPU Clock Speed : 700MHz
BUS Clock Speed : 133MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 667MHz
1. Boot with default mode
2. Boot from Flash
3. Boot from CFCard
4. Enter serial submenu
5. Enter ethernet submenu
6. Modify Flash description area
7. Modify bootrom password
8. Reboot
Boot the operating system.
Boot the virtual file system and the console terminal.
Initialize the Line Process Unit (LPU), interfaces, power modules, and fans.
Boot the modules of different features.
Activate the command line interface (CLI).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Rebooting
*
*
*
145