Ptp Feature Supported By The S9300 - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Figure 12-3 Application of 1588v2 on a bearer network
NodeB

12.2 PTP Feature Supported by the S9300

Seven 1588v2 Devices Supported by the S9300
The S9300 supports the following 1588v2 device types:
l
l
l
l
l
l
l
Four 1588v2 Packet Encapsulation Modes Supported by the S9300
The S9300 supports MAC encapsulation and UDP encapsulation modes.
Issue 03 (2011-12-29)
BC
BITS
RNC
TC
TC
NodeB
NOTE
To use the PTP feature, the CKM-clock board and G24CEAS must be installed on the S9300.
OC: Ordinary clock
BC: Boundary clock
E2ETC: End-to-end transparent clock
P2PTC: Peer-to-peer transparent clock
TCandBC: Transparent clock and boundary clock
E2ETCOC: End-to-end transparent clock and ordinary clock
P2PTCOC: Peer-to-peer transparent clock and ordinary clock
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
TC
BC BC
NodeB
PTP Packet
12 PTP Configuration
GPS
BC
OC
TC
NodeB
208