Huawei Quidway S9300 Configuration Manual page 105

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
# Start the SNMP agent and set the SNMP version to SNMPv2c.
[Quidway] snmp-agent sys-info version v2c
# Configure the alarm function.
[Quidway] snmp-agent trap enable
[Quidway] snmp-agent target-host trap address udp-domain 10.1.1.1 params
securityname public
Step 5 Verify the configuration.
# View the channel used to output alarms to the SNMP agent.
[Quidway] display info-center
Information Center:enabled
SNMP Agent:
channel number : 7, channel name : channel7
# View the alarms output through the channel selected by SNMP agent.
[Quidway] display channel 7
channel number:7, channel name:channel7
MODU_ID
ffff0000 default
416a0000 IP
# View the alarms output to the NM Station through SNMP agent.
[Quidway] display snmp-agent target-host
Target-host NO. 1
-----------------------------------------------------------
IP-address
VPN instance
Security name : public
Port
Type
Version
Level
NMS type
-----------------------------------------------------------
----End
Configuration Files
#
info-center source IP channel 7 trap level informational
info-center snmp channel 7
#
#
vlan 10
#
interface Vlanif10
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/1
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
snmp-agent
snmp-agent local-engineid 000007DB7F00000100003598
snmp-agent community read
snmp-agent sys-info version v2c v3
snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname public
snmp-agent trap enable
#
return
Issue 03 (2011-12-29)
NAME ENABLE LOG_LEVEL
Y debugging
Y debugging
: 10.1.1.1
: -
: 3000
: trap
: v1
: No authentication and privacy
: NMS
public
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Information Center Configuration
ENABLE TRAP_LEVEL
Y debugging
Y informational N
ENABLE DEBUG_LEVEL
N debugging
debugging
93