Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
The value is set for priority2 of the time source.
Step 7 (Optional) Run:
ptp { bits-1pps | bits-dcls } { receive-delay receive-delay | send-delay send-
delay }
The correction for the delay of sending or receiving clock source signals is set.
----End
12.7.4 Checking the Configuration
Prerequisite
All configurations of the 1588v2 time source are complete.
Procedure
Step 1 Run the display ptp all command to check the status and configuration of PTP.
----End
12.8 Maintaining PTP
12.8.1 Clearing PTP Statistics
Context
Statistics cannot be restored after being cleared. So, confirm the action before you run the
command.
After confirming that 1588v2 statistics need to be cleared, run the following command in the
user view.
Procedure
Step 1 Run:
reset ptp statistics { all | interface interface-type interface-number }
The counter counting the number of received 1588v2 packets on the interface is reset, making
statistics on 1588v2 packets to be cleared.
----End
12.8.2 Monitoring PTP
Issue 03 (2011-12-29)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 PTP Configuration
238