Huawei Quidway S9300 Configuration Manual page 68

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Table 5-3 Description of each field in a log message
Field
<Int_16>
TIMESTAMP Time to send out the
HOSTNAME
%%
dd
AAA
B
CCC
(l)
slot=XXX
YYYY
Format of Alarms
Figure 5-3
Issue 03 (2011-12-29)
Indication
Leading character
information
Host name
Huawei logo
Version number
Module name
Log level
Brief description
Information type
Location information
Descriptor
shows the format of the output alarms.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Information Center Configuration
Description
Leading characters are added before logs are
output to log hosts.
Logs saved in the local device do not contain
leading characters.
Available formats for the timestamp are as follows:
l boot: The timestamp in this format indicates a
relative time.
l date: The timestamp in this format indicates the
system time. Timestamps in logs, alarms and
debugging information are in this format by
default.
l short-date: Unlike the date format, timestamps
in the short-date format do not indicate the year.
l format-date: The timestamp in this format is
another format of the system time.
l none: indicates that the information does not
contain any timestamp.
There is a space between the timestamp and the
host name.
By default, the name is Quidway.
Indicates that log information is output by a
Huawei device.
Identifies the version of the log format.
Indicates the name of the module that outputs
information to the information center.
Indicates the severity level of a log.
Describes the information type.
Indicates the user log identifier.
Indicates the number of the slot that sends the
location information.
Indicates detailed information output from each
module to the information center.
Before outputting logs, each module fills this field
to describe contents of logs.
56