Enabling The Information Center; Optional) Naming The Information Channel - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Data Preparation
To configure alarm output, you need the following data.
No.
1
2
3
4
5

5.4.2 Enabling the Information Center

By default, the information center is enabled. You can enable the information center in the event
that the information center is disabled.
Context
Classifying and outputting a large amount of information affects the performance of the system.
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center enable
The information center is enabled.
By default, the information center is enabled.
----End

5.4.3 (Optional) Naming the Information Channel

Naming information channels helps you understand what is output by each channel.
Context
Do as follows on the switch configured with the information center.
Issue 03 (2011-12-29)
Data
l Channel number
l Channel name
Module name
Severity level of alarms
(Optional) Size of an alarm buffer
IP address of Network Management System
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Information Center Configuration
67