Rebooting The S9300; Establishing The Configuration Task; Optional) Rebooting The S9300 Through Command Lines - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
The S9300 implements the Virtual Operating System (VOS) by adopting the technology of
Distributed Object-oriented Programmable Realtime Architecture (DOPRA). The process of
booting the system software is as follows:
Starting at 0x400000...
Initializing Flash Module...................................................Done
¡¡
Press ENTER to get started.
When the terminal displays the preceding message, the system software has started. Press
Enter to enter the command line interface.

9.4 Rebooting the S9300

This section describes how to reboot the S9300.
Context

9.4.1 Establishing the Configuration Task

Before rebooting the S9300, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the required data. This helps you complete the configuration
task quickly and accurately.
Applicable Environment
After upgrading the S9300, you need to reboot it.
Pre-configuration Tasks
None.
Data Preparation
None.

9.4.2 (Optional) Rebooting the S9300 Through Command Lines

You can use commands to reboot the S9300 immediately.
Context
Be cautious to use the reboot command because it can break down the whole network for a short
period of time. Before you reboot the S9300 through the reboot command, the system compares
the current configuration with that saved in the configuration file. If they are not consistent, the
system prompts you to save the current configuration. Ensure that correct files are used for
rebooting the S9300.
Issue 03 (2011-12-29)
NOTE
All the commands for upgrading the system software are used in the user view.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Rebooting
146