Creating A Traffic Policy; Applying A Traffic Policy - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management

6.5.5 Creating a Traffic Policy

Context
Do as follows on the S9300 where a traffic policy for traffic mirroring needs to be created.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic policy policy-name
A traffic policy is created and the traffic policy view is displayed.
Step 3 Run:
classifier classifier-name behavior behavior-name
A traffic classifier is bound to a traffic behavior in the traffic policy.
classifier-name specifies the name of a traffic classifier and must be the same as the name of a
traffic classifier in
specifies the name of a traffic behavior and must be the same as the name of a traffic behavior
in 6.5.4 Creating a Traffic
----End

6.5.6 Applying a Traffic Policy

A traffic policy containing a traffic mirroring action can be applied to an interface, a VLAN, or
the system.
Context
When a traffic policy contains a traffic mirroring action, it cannot be applied to outbound packets
destined for downstream devices in the system view or VLAN view. No error message is
displayed when you apply the traffic policy to outbound packets destined for downstream
devices, but the traffic policy is invalid for such packets.
Procedure
l
Issue 03 (2011-12-29)
6.5.3 Configuring Complex Traffic
Applying a traffic policy to an interface
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number [.subnumber ]
The mirrored interface view is displayed.
3. Run:
traffic-policy policy-name { inbound | outbound }
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Behavior.
6 Mirroring Configuration
Classification; behavior-name
106