Checking The Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
----End

5.5.8 Checking the Configuration

After configuring the debugging message output, you can view the configuration of the
information center.
Prerequisite
The configurations of the Debugging Information function are complete.
Procedure
l
l
----End
Example
Run the display channel command. For example:
<Quidway> display channel 0
channel number:0, channel name:console
MODU_ID
ffff0000 default
416e0000 ARP
Run the display info-center command. For example:
<Quidway> display info-center
Information Center:enabled
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
current messages 512, channel number : 4, channel name : logbuffer
dropped messages 0, overwritten messages 411
Trap buffer:
current messages 256, channel number:3, channel name:trapbuffer
dropped messages 0, overwritten messages 12
logfile:
Information timestamp setting:
Sent messages = 7922, Received messages = 22927
Issue 03 (2011-12-29)
The channel through which debugging information is output to the log host is configured.
By default, debugging information is not output to the log host after the information center
is enabled.
The system supports the configuration of a maximum of eight log hosts to realize backup
among log hosts.
Run the display channel [ channel-number | channel-name ] command to check the
configuration of a channel.
Run the display info-center [ statistics ] command to check the information recorded by
an information center.
NAME ENABLE LOG_LEVEL
Y
Y
channel number : 0, channel name : console
channel number : 1, channel name : monitor
channel number : 5, channel name : snmpagent
enabled,max buffer size 1024, current buffer size 512,
enabled,max buffer size 1024, current buffer size 256,
channel number : 9, channel name : channel9, language : English
log - date, trap - date, debug - boot
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ENABLE TRAP_LEVEL
warning Y
warning Y
5 Information Center Configuration
ENABLE DEBUG_LEVEL
debugging Y
debugging Y
debugging
debugging
79