Process Of Booting The S9300 - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management

9.1 Process of Booting the S9300

This section describes the process of booting the S9300.
The software running on the S9300 includes the BootROM software and system software. The
BootROM software is classified into the basic BootROM and the BootLoad. After the S9300 is
powered on, the basic BootROM starts to run and then boots the BootLoad. Then, the BootLoad
boots the system software.
Figure 9-1 Process of booting the S9300
Issue 03 (2011-12-29)
Figure 9-1
Start
Run basic
BootROM
Yes
Press
Ctrl+A
No
Run BootLoad
Yes
Press
Ctrl+B
No
Run system
software
Enter the CLI
End
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
shows this process.
Enter the Basic
BootROM menu
Upgrade BootLoad
Upgrade basic BootROM
Quit the Basic
BootROM menu
Enter the BootLoad
menu
Upgrade system
software
Quit the BootLoad menu
9 Rebooting
143