Checking The Configuration - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
l (On an IPv6 network) Run:
----End

5.3.11 Checking the Configuration

Checking the Configuration of Information Center
Prerequisite
The configurations of the Information Center function are complete.
Procedure
l
l
l
l
l
----End
Example
Run the display channel [ channel-number | channel-name ] command to check the contents of
information channels.
<Quidway> display channel
channel number:0, channel name:console
MODU_ID
ffff0000 default
channel number:1, channel name:monitor
MODU_ID
ffff0000 default
416c0000 BFD
Issue 03 (2011-12-29)
{ language language-name | binary [ port ] } | { vpn-instance vpn-instance-name
*
| public-net } ]
The channel through which logs are output to the log host is configured.
By default, logs are not output to the log host after the information center is enabled.
The system supports the configuration of a maximum of eight log hosts to realize backup
among log hosts.
info-center loghost ipv6 ipv6-address [ channel { channel-number | channel-
name } | facility local-number | { language language-name | binary [ port ] } ]
*
The channel through which logs are output to the log host is configured.
By default, logs are not output to the log host.
The system supports the configuration of a maximum of eight log hosts to implement backup
among log hosts.
Run the display channel [ channel-number | channel-name ] command to check the
configuration of a channel.
Run the display info-center [ statistics ] command to check the information recorded by
an information center.
Run the display logbuffer [ level severity | size value | slot slot-id ]
the information recorded by a log buffer.
Run the display info-center filter-id [ id ] command to check whether the ID of a single
log is added into the filtering list.
Run the display info-center filter-id command to check whether IDs of all logs are added
into the filtering list.
NAME ENABLE LOG_LEVEL
Y
NAME ENABLE LOG_LEVEL
Y
Y
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ENABLE TRAP_LEVEL
warning Y
ENABLE TRAP_LEVEL
warning Y
debugging Y
5 Information Center Configuration
*
command to view
ENABLE DEBUG_LEVEL
debugging Y
ENABLE DEBUG_LEVEL
debugging Y
debugging Y
debugging
debugging
debugging
64