Displaying The Version; Displaying The Power Status Of The S9300 - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Procedure
Step 1 Run:
display device [ slot slot-id ]
The component type, online status, power status, register status, alarm status, and master/backup
status are displayed.
You can use the command in any view. The information displayed includes the slot number,
component type, online status, power status, register status, alarm status, and master/backup
status.
----End

3.2.2 Displaying the Version

You can run the command to view information about the software version, chassis type, main
control board version, and LPU version of the S9300.
Context
Do as follows on the S9300.
Procedure
Step 1 Run:
display version [ slot slot-id | subrack-id/silkname ]
Version information is displayed.
You can run the display version command in any view to view the version of the S9300. You
can specify subrack-id/silkname to view the version of the board in a specified slot.
This command output includes information about the software version, chassis type, main
control board version, and LPU version.
----End

3.2.3 Displaying the Power Status of the S9300

You can use display commands to view information about the power status and power of the
S9300.
Context
Do as follows on the S9300 whose power status is to be viewed.
Procedure
l
l
Issue 03 (2011-12-29)
Run:
display power
The power status is displayed.
Run:
display power system
Information about the power is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Displaying the Device Status
25