Huawei Quidway S9300 Configuration Manual page 242

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Figure 12-7 Configuring 1588v2 on a TCandBC
Domain2
NodeB
Pre-configuration Tasks
Before configuring 1588v2 on a TCandBC, complete the following tasks:
l
l
Data Preparation
To configure 1588v2 on a TCandBC, you need the following data.
No.
1
2
3
4
5
Issue 03 (2011-12-29)
Domain1
OC2
TCBC2
Configuring parameters of link layer protocols on interfaces to make the status of link layer
protocols Up
Ensuring that OC1 and OC2 have correctly imported clock and time signals from the BITS
Data
Number and IP address of each interface
(Optional) IDs of 1588v2 domains to which devices belong
(Optional) Asymmetric correction value of the 1588v2 packet
(Optional) Interval for sending Announce packets and the timeout period for
receiving Announce packets
(Optional) Interval for sending Sync packets
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BITS1
BC1
P
P
W
12 PTP Configuration
OC1
TCBC1
BITS2
230