Checking The Configuration; Configuring Ptp For A Tc; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management

12.4.6 Checking the Configuration

Prerequisite
All configurations of the BC are complete.
Procedure
l
l
----End

12.5 Configuring PTP for a TC

12.5.1 Establishing the Configuration Task

Applicable Environment
As shown in
ensure the clock synchronization between devices on the bearer network. Core devices on the
bearer network function as TC to forward 1588v2 packets and synchronize the clock or time
between BC and OC.
Figure 12-6 Configuring 1588v2 on TC
NodeB
Issue 03 (2011-12-29)
Run the display ptp all command to display the operation status and configuration of
1588v2.
Run the display ptp interface interface-type interface-number command to display
1588v2 information of the interface.
Figure 12-6, S9300 as Master, NodeBs support 1588v2. 1588v2 is configured to
TC1
OC1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 PTP Configuration
BITS
Master
BC TC2
OC2
NodeB
223