Huawei Quidway S9300 Configuration Manual page 67

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Channel
Number
3
4
5
6
7
8
9
In the case of multiple log hosts, logs can be output through one channel or several channels.
For example, some logs can be output to a log host through Channel 2 (loghost) and some logs
can be output to another log host through Channel 6. To manage channels conveniently, you can
change the name of Channel 6.
Format of Logs
Syslog is a sub-function of the information center. It outputs information to a log host through
port 514.
Figure 5-2
Figure 5-2 Format of the output logs
Table 5-3
Issue 03 (2011-12-29)
Default
Channel Name
Trapbuffer
Logbuffer
Snmpagent
Unspecified
Unspecified
Unspecified
Channel9
shows the format of logs.
<Int_16>TIMESTAMP HOSTNAME %%ddAAA/B/CCC(l):slot=XXX; YYYY
describes each field in a log message.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output Description
Direction
Trap buffer Outputs alarms to the alarm buffer. The
switch assigns a specified area to be the
alarm buffer for recording alarms.
Log buffer Outputs logs to the log buffer. The switch
assigns a specified area to be the log buffer
for recording logs.
SNMP agent Outputs alarms to the SNMP agent.
Unspecified Reserved, this channel can be configured to
output to different directions.
Unspecified Reserved, this channel can be configured to
output to different directions.
Unspecified Reserved, this channel can be configured to
output to different directions.
Log file Outputs logs, alarms and debugging
information to the log file on the CF card
5 Information Center Configuration
55