Powering Off A Board; Powering On A Board; Checking The Configuration - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
No.
1
2

4.3.2 Powering Off a Board

You can run a command to remotely power off a board.
Procedure
l
----End

4.3.3 Powering On a Board

You can run a command to remotely power on a board.
Procedure
Step 1 Run the following command in any view:
power on slot slot-id
The board is powered on.
----End

4.3.4 Checking the Configuration

After a board is powered on or powered off, run the following commands to check the
configurations.
Context
Configuring power-on and power-off of the board is complete.
Procedure
Step 1 Run the display device [ slot slot-id ] command in any view to check the board status.
----End
Result
After boards are powered off, the power status is displayed as PowerOff. After boards are
powered on, the power status is displayed as PowerOn.
Issue 03 (2011-11-27)
Data
Slot number of the board to be powered off
Slot number of the board to be powered on
Run the following command in any view:
power off slot slot-id
The board is powered off.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Management
71