Read Condition Registers - Keithley 6430 Instruction Manual

Sub-femtoamp remote sourcemeter

Hide thumbs Also See for 6430:

Table of Contents

Read condition registers

:STATus:MEASurement:CONDition?

:STATus:QUEStionable:CONDition?

:STATus:OPERation:CONDition?

Select default conditions

:STATus:PRESet

The Standard Event Register is not affected by this command.

:STATus:QUEue[:NEXT]?

The :STATus:QUEue[:NEXT]? query command performs the same function as the

:SYSTem:ERRor? query command. See ":SYSTem subsystem."

:STATus:QUEue:CLEar

These query commands are used to read the contents of the condition

When this command is sent, the following SCPI event registers are cleared

to zero (0):

1. Operation Event Enable Register.

2. Event Enable Register.

3. Measurement Event Enable Register.

As error and status messages occur, they are placed into the Error Queue.

This query command is used to read those messages. See Appendix B for a

list of messages.

This action command is used to clear the Error Queue of messages.

SCPI Command Reference

Read Measurement Condition

Read Questionable Register

Read Operation Condition

Return registers to default conditions

Read Error Queue

Clear Error Queue

Table of Contents