Keithley 6430 Instruction Manual page 398

17-88 SCPI Command Reference
ENABle <list>
:STATus:QUEue:ENABle <list>
Parameters
Query
Description
DISable <list>
:STATus:QUEue:DISable <list>
Parameters
Query
Description
<list> = (numlist)
where numlist is a specified list of messages that you wish to enable for the
Error.
:ENABle?
On power-up, all error messages are enabled and will go into the Error
Queue as they occur. Status messages are not enabled and will not go into
the queue. This command is used to specify which messages you want
enabled. Messages not specified will be disabled and prevented from enter-
ing the queue.
<list> = (numlist)
where numlist is a specified list of messages that you wish to disable for the
Error Queue.
:DISable?
On power-up, all error messages are enabled and will go into the Error
Queue as they occur. Status messages are not enabled and will not go into
the queue. This command is used to specify which messages you want dis-
abled. Disabled messages are prevented from going into the Error Queue.
Enable messages for Error Queue
Query list of enabled messages
Disable messages for Error Queue
Query list of disabled messages