Read Version Of Scpi Standard - Keithley 6430 Instruction Manual

17-96 SCPI Command Reference
Figure 17-3
Key-press
codes
15
EDIT V
DISPLAY
0
TOGGLE
LOCAL
POWER
6
DIGITS SPEED
23
16 31

Read version of SCPI standard

:VERSion?
:SYSTem:VERSion?
Description
The queue for the :KEY? query command can only hold one key-press.
When :KEY? is sent over the bus, and the SourceMeter is addressed to talk,
the key-press code number for the last key pressed (either physically or with
:KEY) is sent to the computer.
The key-press code number for the last key pressed (either physically or
with :key) is sent to the computer.
26 2
22 29 5 12 19 8
6430 SUB-FEMTOAMP SourceMeter ®
MEAS SOURCE
Ω
I FCTN V I
1
2 3 4 5 EDIT
REL TRIG SWEEP
FILTER LIMIT
7 8 9 +/-
STORE RECALL CONFIG MENU EXIT ENTER
6 20
7 21 4 3 18
30 14 13 28 27 11 10
This query command is used to read the version of the SCPI standard being
used by the SourceMeter. Example code:
1996.0
The above response message indicates the version of the SCPI standard.
Parameters
<NRf> = 1 RANGE up arrow key
1
®
RANGE
AUTO
ON/OFF
RANGE
OUTPUT
17 24
9
Read SCPI version
2 SOURCE down arrow key
3 left arrow key
4 MENU key
5 FCTN key
6 FILTER key
7 SPEED key
8 EDIT key
9 AUTO key
10 right arrow key
11 EXIT key
12 V (SOURCE) key
13 LIMITS key
14 STORE key
15 V (MEAS) key
16 TOGGLE key
17 RANGE down arrow key
18 ENTER key
19 I (SOURCE) key
20 TRIG key
21 RECALL key
22 I (MEAS) key
23 LOCAL key
24 ON/OFF key
25 - (not used)
26 SOURCE up arrow key
27 SWEEP key
28 CONFIG key
29 Ω key
30 REL key
31 DIGITS key