Figure 4-1 Ohms Configuration - Keithley 6430 Instruction Manual

4-2 Ohms Measurements
Ohms configuration menu
Press CONFIG then Ω to access the ohms configuration menu. Use the Rules to navigate
menus in Section 1 to select the various items in the menu tree, which is shown in Figure 4-1.
Menu items include:
•
•
•
•
The following paragraphs discuss each of these aspects in detail.
Figure 4-1
Ohms configuration
menu tree
SOURCE
AUTO MANUAL
SOURCE — Select AUTO or MANUAL source mode.
GUARD — Choose OHMS or CABLE guard.
SRC RDBK — Enable or disable source readback mode.
OFFSET COMPENSATION — Enable or disable offset-compensated ohms.
GUARD
OHMS CABLE
CONFIG
Ω
SRC
RDBK
ENABLE DISABLE
OFFSET
COMPENSATION
ENABLE DISABLE